Solution: FTP from LAN to WAN over SQUID.
-
Hi guys and girls
I have had a huge problem getting FTP to work (using SQUID) from my LAN to my WAN.I have written a guideline for this and is available at:
http://cyber7.l1fe.co.za/2011/10/20/pfsense-adding-the-ability-to-ftp-from-lan-to-wan/
Basically the steps are:
In SQUID: add thefollowing in your Custom Options: (NOTE: the ;;; is for new-lines);;;acl ftp proto FTP;http_access allow ftp;acl CONNECT method CONNECT;acl ftp_port port 21;;http_access allow ftp_port CONNECT;;;
You also have to add in the Access Control/acl sslports the following: (NOTE: this enables the ports for FTP)
21 50000-50050
The last thing you need to do is disable your System Tunables “debug.pfftpproxy” by changing the “(default) 0″ value to “1″
That is it…I use FileZilla’s free FTP client and it works like a charm. Just remember to add your PROXY into the CLIENT.
Kind regards
Aubrey Kloppers
Bible Society of SA -
This solution did not work in my case.
I use SquidGuard. Is there any thing else that I could try?
Regards.
Rafael