Static route not directing traffic to non-default gateway
-
I have two pfSense 2.0 boxes and I'm having a hard time getting a static route working.
Here is a diagram of my network.

I am trying to access resources on the 192.168.215.0 /24 network from the 192.168.0.0 /24 network. I have set the wan port on pfSense1 as a gateway on pfSense0 and also added static route that's supposed to direct traffic destined for 192.168.215.0 /24 through 192.168.11.13 (WAN on pfSense1).


Needless to say it's not working. Traffic destined for 192.168.215.10 is being directed to the default gateway instead of the WAN port on pfSense1. It's like the routing table entry for the .215 network doesn't exist. I just don't get it.

All these images show statuses on pfSense0.
-
Hello,
I have a similar problem.
netstat -rn shows that the static route exists.
But the firewall logs show that the traffic goes through the default gateway (or tries to).
Both the static route and the default gateway are on the WAN-side.pfSense (2.0) is acting as an OpenVPN gateway.
Any help on this?
-
One of those "D'oh!"-moments.
In the Advanced-settings, there is an entry for "Bypass firewall rules for traffic on the same interface".
That helped a lot.Best Regards,
Rainer -
D'oh, indeed.
Thank you.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy