Printing to other network segment
-
Hi
Since upgrading from 1.2.3 to 2.0.1-RELEASE (i386) i cannot print from the 172.16.1.0 (LANE) network to 192.168.1.0 (LAN). Printer IP 192.168.1.40.
The firewall rules are the same but the printer seems not connected (except Anti-Lockout Rule). Before upgrade no problem.LAN:
PASS * * * LAN Address 80 443 * * Anti-Lockout Rule
PASS * 192.168.1.40 * LANE net * * none Access from the Printer to LANE
BLOCK * LAN net * LANE net * * none LAN -> Block access to LANE (generally no access to LANE)
PASS * LAN net * * * * none Default LAN -> anyLANE:
PASS * LANE net * 192.168.1.40 * * none LAN -> Printer
BLOCK * LANE net * LAN net * * none LANE -> Block access to LAN (generally no access to LAN)
PASS * LANE net * * * * none Default LANE -> anyWhat could be the problem?
Thank for help.
Dani -
Are you using automatic or manual outbound NAT?
-
Automatic outbound NAT rule generation
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy