If OpenVPN Active, IPv6 Tunnel Drops?
-
Hello Everyone,
I have an OpenVPN client connection to HideMyAss, as well as an IPv6 tunnel to HE.net.
I have two LAN subnets on the LAN interface, 10.0.0.0/24 and 2001:470:8:699::/64.
I have a 3rd physical NIC named VPN that has subnet 192.168.50.0/24 assigned to it.
I only want 192.168.50.0/24 routed across the HMA VPN, so I have turned on Manual Outbound NAT and have the following two rules configured:
HMA 192.168.50.0/24 * * * * * NO Phone
WAN any * * * * * NO LANIf I start the OpenVPN service, the HMA VPN connection is established and traffic flows as I would like it. However, once the OpenVPN connection is established, the gateway to HE.net goes offline and I am unable route traffic from my LAN to HE.net.
If I stop the OpenVPN service, the HE.net IPv6 tunnel immediately re-establishes itself.
I'm stumped and I don't see anything IPv6 related in the logs (unless there is an IPv6 log available via SSH?).
Help!
-
Are they pushing you a default route over OpenVPN? If so your tunnel endpoint traffic would be trying to go over the tunnel as well, so he.net would see it coming from a different IP all of a sudden.
-
Are they pushing you a default route over OpenVPN? If so your tunnel endpoint traffic would be trying to go over the tunnel as well, so he.net would see it coming from a different IP all of a sudden.
Ahh ha, brilliant! I have "redirect-gateway def1;" in my OpenVPN config. I just removed it and the VPN still works. The OpenVPN config also reports "Jan 10 13:49:57 openvpn[47169]: ROUTE default_gateway=68.67.x.x" which is my ISPs (WAN) gateway. I don't see any other indication in the logs that they are pushing me a default gateway.
I am going to reconfigure IPv6 and see if it works now. If I still can't get it working, if I update HE.net with the public IP of my VPN tunnel, then that should work correct? I really don't care if the HE.net traffic has to traverse the VPN, I'm only utilizing IPv6 for learning.
-
Yeah if all else fails, giving he.net the vpn public IP would work fine (but would increase latency)
-
Yeah if all else fails, giving he.net the vpn public IP would work fine (but would increase latency)
I think they are pushing me a default gateway, as I updated everything and it didn't work. I do see this in the OpenVPN logs: Jan 10 13:49:57 openvpn[47169]: /sbin/route add -net 0.0.0.0 74.115.x.x 128.0.0.0
That IP is my gateway IP with HMA.
Regardless, I allowed HE.net to ping my HMA public IP and updated the GIF interface to utilize the HMA interface as the parent interface and bingo, my HE.net tunnel came up. http://test-ipv6.com/ reports a 10/10 on both tests.
Thanks for your assistance!
-
That should work, you might also try "push-reset" in your client config, that should make it stop taking the default gateway from the far side.
-
That should work, you might also try "push-reset" in your client config, that should make it stop taking the default gateway from the far side.
I will give that a shot and report back!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better ๐
Register LoginPrivacy Policy · Cookie Policy