HELP ROUTE/NAT
-
Hello,
I needo help, have just installed PFSENSE and in my computer I have 3 NICS:
- LAN: 10.1.1.xxx
- WAN: DHCP
- OPT (WAN2): 192.168.2.2
I have two ADSL and I want use one of them only for the navigation (port 80).
I want that the whole traffic that this one directed the port 80 goes out for OPT (WAN2). In iptables the serious configuarción something like that:
Iptables-t nat - to POSTROUTING - protocol tcp-s $LAN - destination-port 80-j SNAT - to-source 192.168.2.2
You might say to me in PFSENSE since(as,like) I can put this configuration. I am raw and go trying(meaning) it several days and I do not obtain it.
A greeting and thank you very much for everything.
-
Have a look at http://doc.pfsense.org/index.php/Multi-Wan/Load-Balancing . What you want to do is similiar, you just don't use pools (skip that part) but a gateway IP in your firewallrules.
-
THANKS FOR HELP ME.
ALL IS OK NOW.
BYE!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy