Trying to Build a machine for 100Mbit/sec VPN
-
Requirements:
~100Mbit/sec VPN performance
Small enclosure (read low heat)
Prefer IPMI 2.0 interface
Lowest power usage while meeting above requirements, so I do not expect sub 20W idle however would like to get under 50W idleI currently am looking at this setup:
Motherboard: SuperMicro MDB-X9SCM-F-O
CPU: Intel G630T (35W)
Memory: 2x4GB ECC unbuffered (motherboard requires ECC) - Yes 8GB is probably overkill but it is so cheap, I guess less memory would reduce my power requirements some.
Drive: OCZ Onyx Series 32GB SSD - Rated at 1W Active and 375mW idle
Case: SuperMicro CSE-510-200BAlso are there any issues with the onboard NICs with FreeBSD still? I noticed searching here that there was some concern but those posts are pretty old now.
-
It has been reported that the 82579LM is supported by the x64 build of 2.0.1.
See: http://forum.pfsense.org/index.php/topic,45922.0.htmlSteve
-
Hello,
Did you suceed with your install ?Regards