PFSense 2.0.1 OpenVPN routing problem
-
Hello,
I've configured a open vpn server (remote access with ssl/tls and user auth).
Im trying to connect an windows 7 PC with the pfsense using the newest OpenVPN client (today downloaded).The connection itself seems to works. In the pfsense openvpn status page I can see the client/user connected.
The OpenVPN Client on the win7 pc also reported a successfully connection.But I can't reach any server in the network.
My Tunnel Network is 192.168.64.0/24 and the lan network (target side) is 192.168.62.0/24. This is also configured in the openvpn server.
The lan network of the client pc is 192.168.0.0/24
Additionaly I've added a push route to the advanced options (push "route 192.168.62.0 255.255.255.0" ) but didn't help.
In the firewall in the openvpn tab I've create a (test) rule which allows everything (* in every column).After successfully connected to the pfsense I've tried a "tracert" on the windows 7 client pc to a server in the lan (i.e. 192.168.62.142) and the route went not through the tunnel into the target LAN. The route went directly into the internet.
Then I've checked the routing table of the windows pc with "route print" and got the following result:
Interface List 44...00 ff 6f 35 26 e8 ......TAP-Win32 Adapter V9 17...00 ff e4 88 ae 42 ......TeamViewer VPN Adapter 10...00 1e 8c 1f 99 13 ......NVIDIA nForce Networking Controller 21...08 00 27 00 c0 d7 ......VirtualBox Host-Only Ethernet Adapter 1...........................Software Loopback Interface 1 15...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 11...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 18...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 22...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #4 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.103 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 169.254.0.0 255.255.0.0 On-link 169.254.89.114 276 169.254.89.114 255.255.255.255 On-link 169.254.89.114 276 169.254.255.255 255.255.255.255 On-link 169.254.89.114 276 192.168.0.0 255.255.255.0 On-link 192.168.0.103 276 192.168.0.103 255.255.255.255 On-link 192.168.0.103 276 192.168.0.255 255.255.255.255 On-link 192.168.0.103 276 192.168.64.4 255.255.255.252 On-link 192.168.64.6 286 192.168.64.6 255.255.255.255 On-link 192.168.64.6 286 192.168.64.7 255.255.255.255 On-link 192.168.64.6 286 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 169.254.89.114 276 224.0.0.0 240.0.0.0 On-link 192.168.0.103 276 224.0.0.0 240.0.0.0 On-link 192.168.64.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 169.254.89.114 276 255.255.255.255 255.255.255.255 On-link 192.168.0.103 276 255.255.255.255 255.255.255.255 On-link 192.168.64.6 286 ===========================================================================
So my question is: Where is the route to 192.168.62.x? Did I forget to configure something?
Thx for any help
Ben
-
On Windows 7 you need to start OpenVPN as administrator or it doesn't have the permissions to update the routing table of the PC.
-
On Windows 7 you need to start OpenVPN as administrator or it doesn't have the permissions to update the routing table of the PC.
That was the problem. Thank you very much. Everything works fine now.