<![CDATA[Further Troubleshooting Dansguardian]]>Hi All
I have set up both the squid and dansguardian packages. When I manually put in my proxy's IP address and port 3128, I get on the net but when I put in the proxy's IP address and port 8080, I get nothing. Both services are on the same box.

Dansguardian listens on the box's lan ip address and port 8080

Now Status => Services shows Dansguardian to be running but when I go to the command line and do sockstat -4 | grep 8080, nothing shows up.
When I try to manually start DG from the command line, it fails.

Any help on how I could further troubleshoot this?

]]>https://forum.netgate.com/topic/43811/further-troubleshooting-dansguardianRSS for NodeSun, 07 Jun 2026 20:49:16 GMTTue, 10 Apr 2012 19:34:42 GMT60<![CDATA[Reply to Further Troubleshooting Dansguardian on Tue, 10 Apr 2012 21:53:02 GMT]]>Ok it seems my problem was that both squid and DG were bound to the lan IP address. I set squid to listen on loopback and then started it manually.
My final problem now though is that when I
reboot the box, I need to manually start squid from the command line and then all is well not sure why that is. It should start automatically.

]]>https://forum.netgate.com/post/329912https://forum.netgate.com/post/329912Tue, 10 Apr 2012 21:53:02 GMT<![CDATA[Reply to Further Troubleshooting Dansguardian on Tue, 10 Apr 2012 20:29:40 GMT]]>go on console/ssh and run

/usr/local/etc/rc.d/dansguardian start

or

ps ax | grep -i dansguardian

]]>https://forum.netgate.com/post/329897https://forum.netgate.com/post/329897Tue, 10 Apr 2012 20:29:40 GMT<![CDATA[Reply to Further Troubleshooting Dansguardian on Tue, 10 Apr 2012 19:49:27 GMT]]>The strange thing is that status => services says DG is running even when I refresh, it says running. I only realised that it was not running because I did the sockstat -4 command. If I click restart in the GUI, it says DG restarted. I even checked in /var/log/dansguardian/access.log
but the file has nothing in it.

]]>https://forum.netgate.com/post/329891https://forum.netgate.com/post/329891Tue, 10 Apr 2012 19:49:27 GMT<![CDATA[Reply to Further Troubleshooting Dansguardian on Tue, 10 Apr 2012 19:38:51 GMT]]>@petros:

When I try to manually start DG from the command line, it fails.

What error do you get on dansguardian startup?

Did you create a firewall rule to allow traffic on port 8080?

]]>https://forum.netgate.com/post/329889https://forum.netgate.com/post/329889Tue, 10 Apr 2012 19:38:51 GMT