<![CDATA[Diffserv Code Point]]>how to see ip traffic that has been marked with a Diffserv Code Point.
for example:

pfctl -sr

match out log quick on re0 inet proto tcp from 192.168.30.0/26 to any port = http dscp 0xb8 label "USER_RULE" dnpipe(3, 2)
match out log quick on re0 inet proto tcp from 192.168.30.0/26 to 127.0.0.1 port = http dscp 0xb8 label "USER_RULE" dnpipe(3, 4)
match out log quick on re0 inet proto udp from 192.168.30.0/26 to 127.0.0.1 port = http dscp 0xb8 label "USER_RULE" dnpipe(3, 4)
match out log quick on re0 inet proto tcp from 192.168.30.0/26 to any port = https dscp 0x28 label "USER_RULE" dnpipe(1, 2)
match out log quick on re0 inet proto tcp from 192.168.30.0/26 to 127.0.0.1 label "USER_RULE" dnpipe(3, 4)
match out log quick on re0 inet proto udp from 192.168.30.0/26 to 127.0.0.1 label "USER_RULE" dnpipe(3, 4)
match out log quick on re0 inet proto tcp from 192.168.30.0/26 to 127.0.0.1 port = 3128 dscp 0xb8 label "USER_RULE" dnpipe(3, 4)

I have tried to capture packets but can not be seen with certainty that the flow of traffic
thank you

]]>https://forum.netgate.com/topic/43848/diffserv-code-pointRSS for NodeWed, 14 Oct 2026 17:52:17 GMTWed, 11 Apr 2012 16:40:10 GMT60<![CDATA[Reply to Diffserv Code Point on Wed, 11 Apr 2012 19:38:44 GMT]]>The rules do not set a DSCP value, they only match a value that already exists in the packet.

It would show up in a packet capture if the packets have already been tagged by whatever originated the traffic.

]]>https://forum.netgate.com/post/330082https://forum.netgate.com/post/330082Wed, 11 Apr 2012 19:38:44 GMT