Assassins Creed Revelations and port forwarding not working help!
-
http://ubisoft.custhelp.com/app/answers/detail/a_id/15912/related/1
and
http://gaming.stackexchange.com/questions/39264/what-ports-need-to-be-opened-to-play-multiplayer-reliably^ Sources above to figure out what ports I need to forward.
This pfsense box is setup for dual WAN labeled "CHARTER" and "CENTURYLINK" in a round robin fail over mode. Charter being the primary internet access.
Ok I have this game installed, and I'm getting "bad upload" and "strict NAT" and it's impossible to play a game.
I have a static IP set on this computer and the windows firewall completely turned off, and in pfsense I have outbound NAT set to manual. I've BROADLY setup port forwards with NAT reflection rules setup such as:If Proto Src. addr Src. ports Dest. addr Dest. ports NAT IP NAT Ports Description
CHARTER TCP/UDP * * CHARTER address 21200 192.168.0.101 *
For all the ports listed on the pages linked above. I've also set them up for the CENTURYLINK internet connection.
But I still cannot get off strict NAT :( Please help!
-
Try this tutorial, it seems to be fairly popular. Please leave comments, so it can be improved if need be.
-
@M.I.Bovrd:
Try this tutorial, it seems to be fairly popular. Please leave comments, so it can be improved if need be.
^The only thing I did not do before I read that page was set the 2 rules to static ports.
Now when I go into the game, at first it showed green for open nat with bad connection, then I refreshed it, and it says moderate nat (orange) with bad connection..
any more ideas to make it completely open with "good" connection? You would think 25MB down and 2MB up would be "good"
-
This set-up was tested with a single WAN, I have no way of testing it with 2 WAN's.
If you have the same rules for both WAN's then I would suspect the connections would have to be persistant. Try turning off Round Robin, see if it works then tweak the load balancing rules to suit.