<![CDATA[1:1 Mapping reflection problem]]>Hello wise fellows, I am getting very upset, I did an 1:1 mapping, but the reflection doesnt work, if i set my browser settings to use the proxy, I cannot access the site with the external IP inside my network (I can externally access it, and using the internal IP)

Attached my settings
Capture1.JPG
Capture1.JPG_thumb
Capture2.JPG
Capture2.JPG_thumb
Capture3.JPG
Capture3.JPG_thumb
Capture4.JPG
Capture4.JPG_thumb
Capture5.JPG
Capture5.JPG_thumb

]]>https://forum.netgate.com/topic/44848/1-1-mapping-reflection-problemRSS for NodeSat, 11 Apr 2026 20:08:00 GMTThu, 10 May 2012 20:33:32 GMT60<![CDATA[Reply to 1:1 Mapping reflection problem on Fri, 11 May 2012 12:56:51 GMT]]>Yes, thats how its configured.

And thanks, this will be much appreciated

]]>https://forum.netgate.com/post/335945https://forum.netgate.com/post/335945Fri, 11 May 2012 12:56:51 GMT<![CDATA[Reply to 1:1 Mapping reflection problem on Fri, 11 May 2012 02:21:03 GMT]]>Reflection doesn't currently work for connections coming from the pfSense router itself, which is the case when the proxy is on the router.  I'm assuming this is how you have it configured.  I'll need to look into whether it is possible to redirect connection requests coming from the router itself.

]]>https://forum.netgate.com/post/335846https://forum.netgate.com/post/335846Fri, 11 May 2012 02:21:03 GMT<![CDATA[Reply to 1:1 Mapping reflection problem on Thu, 10 May 2012 20:45:10 GMT]]>I am using 1:1, not nat, but still after enabling it, the problem persists

Here is what i get in return


While trying to retrieve the URL: http://EXTERNAL_IP/

The following error was encountered: 
• Connection to Failed 

The system returned: 
    (64) Host is down
 The remote host or network may be down. Please try the request again.
]]>https://forum.netgate.com/post/335810https://forum.netgate.com/post/335810Thu, 10 May 2012 20:45:10 GMT<![CDATA[Reply to 1:1 Mapping reflection problem on Thu, 10 May 2012 20:39:36 GMT]]>In your last screenshot:
The checkbox disabling NAT-reflection is active.

]]>https://forum.netgate.com/post/335808https://forum.netgate.com/post/335808Thu, 10 May 2012 20:39:36 GMT