Pfsense using swap memory when it shouldn't !?
-
Hi,
My pfsense machine is up without any restarts for several days, it's working great but i notticed that swap memory using is increasing, yasterday was at 2% now is at 4%…With 40-50% loading of ram, is it normaly ?i thought that swap is used when memory is at full use...
Thanks
-
It depends on the actual usage. If things are really not being used in RAM it can swap out a little to keep using RAM for caching and overall speed. That's really a question for FreeBSD in general though. I thought someone out there had an FAQ/Wiki entry about that for FreeBSD.
-
Not to resurrect a dead(ish) thread but I'm having the same problem. I assumed it was Snort until I disabled the interface it was listening on. My swap fills up after a day or so. The only package installed is snort, but it isn't enabled currently.
I had dansguardian installed to play with, but that has been removed as well.
-
But… when I removed the snort package outright swap cleared up and system appears to be running normally.
By the way, the system has 4GB of RAM and is a core 2 duo Intel system. Shouldn't be a problem, but oh well. I was planning to bring up snort on a mirror port anyway.