<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[PfSense + Cisco]]></title><description><![CDATA[<p dir="auto">Hi all,<br />
I'm stuck in a configuration of a tunnel between a Cisco router and a pfSense 2.0.1… well at least stuck with phase2 network definition / or routes.<br />
Let me explain:</p>
<p dir="auto">schema<br />
10.19.0.0/16 –----------- publicIP 1 ----((internet))--------publicIP 2 ------------- 192.168.10.0/24  :  Linux server is 192.168.10.25<br />
                        Cisco                                                                      pfSense<br />
                    10.19.1.2                                                                  192.168.10.4</p>
<p dir="auto">In fact the tunnel is up and running: status UP<br />
the SAD shows some traffic from the Cisco router. 120B each time I ping from Cisco router a server behind pfSense.</p>
<p dir="auto">publicIP 2 publicIP 1 ESP c29780f7 3des-cbc hmac-md5 66880 B<br />
publicIP 1 publicIP 2 ESP 0cddecca 3des-cbc hmac-md5 1800 B</p>
<p dir="auto">This linux box <strong>does</strong> receive perfectly the ping and replies correclty, as show ip table log I create to test that:<br />
Jul 18 03:26:15 linuxserver kernel: [354768.967481] PING_IN__linuxserver : IN=eth0 OUT= MAC=xxx <strong>SRC=10.19.1.2 DST=192.168.10.25</strong> LEN=100 TOS=0x00 PREC=0x00 TTL=254 ID=466 PROTO=ICMP TYPE=8 CODE=0 ID=39 SEQ=3<br />
Jul 18 03:26:15 linuxserver kernel: [354768.967515] PING_OUT_linuxserver : IN= OUT=eth0 <strong>SRC=192.168.10.25 DST=10.19.1.2</strong> LEN=100 TOS=0x00 PREC=0x00 TTL=64 ID=40066 PROTO=ICMP TYPE=0 CODE=0 ID=39 SEQ=3</p>
<p dir="auto">What I don't get is that even if SAD traffic from pfSense is growing, and the tunnel is up, the other side receives nothing</p>
<p dir="auto">I have also 2 IPSec firewall rules in pfSense to allow traffic both ways: I activated the log to understand better</p>
<ul>
<li>LAN net * 10.19.0.0/16 * * none   2to1 in IPSEC_FW_RULE </li>
<li>10.19.0.0/16 * LAN net * * none   1to2 in IPSEC_FW_RULE </li>
</ul>
<p dir="auto">I can see in logs the 1to2 rule triggered, and never the 2to1 (eg: when the linux server replies to the ping)….</p>
<p dir="auto">What am I missing ?</p>
<p dir="auto">Thanks for your help</p>
]]></description><link>https://forum.netgate.com/topic/46934/pfsense-cisco</link><generator>RSS for Node</generator><lastBuildDate>Wed, 11 Nov 2026 00:19:27 GMT</lastBuildDate><atom:link href="https://forum.netgate.com/topic/46934.rss" rel="self" type="application/rss+xml"/><pubDate>Wed, 18 Jul 2012 03:02:26 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to PfSense + Cisco on Wed, 25 Jul 2012 07:50:15 GMT]]></title><description><![CDATA[<p dir="auto">Hi,</p>
<p dir="auto">About the routes, i thought the same thing, that they were created automatically…<br />
Just for the test i create a route "tunnel virtual IP ------wangw" and then the reply icmp packet were allowed so try it.</p>
<p dir="auto">Do you try to do some captures in pfsense GUI when you ping your lan and wan from the cisco router ? it helps a lot.</p>
<p dir="auto">To check routes on the pfsense, go in the diagnostic section then "routes" you can see all the pfsense routes (manually and automatically created)</p>
]]></description><link>https://forum.netgate.com/post/348515</link><guid isPermaLink="true">https://forum.netgate.com/post/348515</guid><dc:creator><![CDATA[Lazyhead]]></dc:creator><pubDate>Wed, 25 Jul 2012 07:50:15 GMT</pubDate></item><item><title><![CDATA[Reply to PfSense + Cisco on Wed, 18 Jul 2012 17:10:12 GMT]]></title><description><![CDATA[<p dir="auto">Hello,<br />
here is an update:</p>
<p dir="auto">as said above, I can't see the IPSEC Firewall rule triggered when 192.168.10.25 replies to a 10.19.1.2 ping request.<br />
In fact, I can see a LAN Firewall rule triggered if I log ICMP from my test server<br />
LOG:<br />
pass  Jul 18 13:09:02 LAN 192.168.10.25 10.19.1.2        ICMP  // ping started from 192.168.10.25<br />
pass Jul 18 13:08:15         enc0 10.19.1.2         192.168.10.25 ICMP  // ping started from 10.19.1.2</p>
<p dir="auto">So the problem seems to be that the route to IPSec tunnel does not exist: traffic to 10.19.x.x does NOT go to tunnel interface.<br />
I checked my phase2 settings:<br />
LOCAL Network = LAN Subnet<br />
REMOTE Network = Network 10.19.0.0 / 16</p>
<p dir="auto">((NB: I tried to put manually 192.168.10.0 / 24 in LOCAL Network, but I have the same results))</p>
<p dir="auto">I though routes created by the IPSec tunnel were created automatically (I read this in my searches).<br />
Isn't it the case ?<br />
How can I check this point as there is no place to see Tunnel Automatically created routes ?</p>
]]></description><link>https://forum.netgate.com/post/347558</link><guid isPermaLink="true">https://forum.netgate.com/post/347558</guid><dc:creator><![CDATA[ATI]]></dc:creator><pubDate>Wed, 18 Jul 2012 17:10:12 GMT</pubDate></item></channel></rss>