FreeRADIUS2 runing but it can't login on pfSense 2.0.1-RELEASE (i386)
-
I install pfSense 2.0.1-RELEASE (i386) + freeRADIUS2, but it can't login
![1 all service.JPG](/public/imported_attachments/1/1 all service.JPG)
![1 all service.JPG_thumb](/public/imported_attachments/1/1 all service.JPG_thumb)
![2 FreeRADIUS status stop.JPG](/public/imported_attachments/1/2 FreeRADIUS status stop.JPG)
![2 FreeRADIUS status stop.JPG_thumb](/public/imported_attachments/1/2 FreeRADIUS status stop.JPG_thumb)
![3 Username FreeRADIUS.JPG](/public/imported_attachments/1/3 Username FreeRADIUS.JPG)
![3 Username FreeRADIUS.JPG_thumb](/public/imported_attachments/1/3 Username FreeRADIUS.JPG_thumb)
![4 NAS Clients and shared secret.JPG](/public/imported_attachments/1/4 NAS Clients and shared secret.JPG)
![4 NAS Clients and shared secret.JPG_thumb](/public/imported_attachments/1/4 NAS Clients and shared secret.JPG_thumb)
![5 interface.JPG](/public/imported_attachments/1/5 interface.JPG)
![5 interface.JPG_thumb](/public/imported_attachments/1/5 interface.JPG_thumb)
![6 config captiveportal.JPG](/public/imported_attachments/1/6 config captiveportal.JPG)
![6 config captiveportal.JPG_thumb](/public/imported_attachments/1/6 config captiveportal.JPG_thumb) -
You want to use this with CaptivePortal ?
If yes, the CaptivePortal is running on an interface and this interface is the interface you have to enter in freeradius -> clients
What did you enter on freeradius -> interfaces ? On which interface is freeradius listening ? This is not 127.0.0.1 - it is probably the same interface as the CP is activated on - so your LAN interface.Example:
WAN –- pfsense----LANThen your CP is running on LAN interface and your freeradius is listening on any (*) or on LAN interface.
-
You want to use this with CaptivePortal ?
If yes, the CaptivePortal is running on an interface and this interface is the interface you have to enter in freeradius -> clients
What did you enter on freeradius -> interfaces ? On which interface is freeradius listening ? This is not 127.0.0.1 - it is probably the same interface as the CP is activated on - so your LAN interface.Example:
WAN –- pfsense----LANThen your CP is running on LAN interface and your freeradius is listening on any (*) or on LAN interface.
No, My CaptivePortal listen on OPT1 Interface
![7 FreeRADIUS on OPT1.JPG](/public/imported_attachments/1/7 FreeRADIUS on OPT1.JPG)
![7 FreeRADIUS on OPT1.JPG_thumb](/public/imported_attachments/1/7 FreeRADIUS on OPT1.JPG_thumb) -
freeradius -> clients: IP address of OPT1
freeradius -> interfaces: chosse * for all interfaces or enter the IP of OPT1
CaptivePortal: Enter the OPT1 IP address as RADIUS serverOn CaptivePortal set OPT1 IP as NAS Identifier.