<![CDATA[Routing Problem through IPsec Tunnel]]>Hi there! I have a routing Problem, which is somehow connected to IPSec. I'm having 2 Sites both running PFSense 2 with the following Setup:

SITE A                                                                                                                                                        SITE B

–-- WAN1 Net (192.168.0.0/24) ------- Router1 ------
                                                |                                                                          |
LAN (192.168.1.0/24) ---- PFSense                                                                              --- Internet ------------- PFSense ---- LAN (192.168.10.0/24)
                                                |                                                                          |
                                                ---- WAN2 Net (192.168.2.0/24) ------- Router2 ------

I have a IPSec Tunnel setup an working fine through Router 1 and I can access LAN from Site A and the other way around. Now I want to access the Router 1 and 2 from Site B Network. The Problem is,
I cannot ping/access the router but only the PFSense WAN1 Interface IP. On Site A PfSense I had to Setup static routes to get access to the router, which works fine from Site A Lan, but not via Tunnel. I created 2 Phase 2 entries for 192.168.1.0 and 192.168.0.0 whose statuses are green. Where is my mistake?

]]>https://forum.netgate.com/topic/47573/routing-problem-through-ipsec-tunnelRSS for NodeFri, 17 Jul 2026 14:42:00 GMTFri, 10 Aug 2012 06:44:57 GMT60