Mulwan with wan1 only for a host
-
Hi,
mulwan with wan1 only for host 10.1.1.9
Alix 3D1
wifi card ath0 for use wan1
wifi card ath1 for use wan2lan port vr0
Interfaces/
LAN
10.1.1.1/24WAN1
ipaddr 192.168.1.254/24 (DMZ)
gateway WAN1GW1-192.168.1.1WAN2
ipaddr 192.168.0.254/24 (DMZ)
gateway WAN2GW2-192.168.0.1Gateways/
WAN1GW1 (default) Interface=WAN1 Gateway=192.168.1.1
WAN1GW1 Interface=WAN2 Gateway=192.168.0.1
Firewall/rules/lan
1 Route allow LAN single host to WAN1 pass=yes
proto *
Source 10.1.1.9 Port *
Destination * Port *
Gateway WAN1GW12 Default allow LAN to any rule pass=yes
proto *
Source * Port *
Destination * Port *
Gateway WAN2GW2my purpose ok
for pc/host 10.1.1.9 traffic is to WAN1GW1
for other host traffic is to WAN2GW2problem unexpected.
Traffic from WAN2 slows traffic WAN2 end traffic from WAN1 slows traffic WAN1.
when starting speed test from 10.1.1.9 and other host crashes and restarts when traffic from another host ends.
Because if the traffic is separated by two gateways?Thank you for any help.