Best vlan switch for pfsense
-
Thanks for information.
Also tell me , what is your view about netgear GS108T-200.
Is this Switch is VLAN capable for pfsense???? -
netgear GS108T-200.
Is this Switch is VLAN capable for pfsense?The GS108Tv2 (GS108T-200) would work, as well as the RB250GS. I like the Netgear because of the metal housing and the warranty.
-
I believe the GS108E (and the GS105E) are vlan capable if you need a cheaper option.
Steve
-
I believe the GS108E (and the GS105E) are vlan capable if you need a cheaper option.
Steve
And you only get a Windows configuration utility to configure those VLANs
-
Really? Thanks for the heads up. ::)
Steve
-
I have both the Netgear GS108Tv2 and the HP 1810G-8. which I think is still current.
Not much to separate them really. Both work well as VLAN-capable switches.
Both have useless NTP clients. The Netgear polls the NTP server every minute until it gets a Kiss-of Death reply and the HP NTP client just doesn't work properly. Not much good if you want to log anything from them.
-
The GS105E switch as well as only having the Windows configuration program " Pro Safe Plus Utility"will only let you change ip address etc if it's in the same subnet as the managing machine i.e it will still "discover" it , using Layer 2 presumably but you have to change the subnet of the manager to do anything.
The GS108Tv2 has a Windows config " Smart control center" which allows ip address changes on the switch irrespective of the managing pc ip AS WELL as the Web interface - much more useful -
-
Two day ago, I buy netgear gs108t for increasing wan ports.
Now an other problem has came and that is i don't to how to configure it. Now for more learning I am requesting to you to send me conf file(backup file) of your netgear gs108t
It will help me by giving me some ideas about netgear gs108t configuration.
Please Help ME…. -
on pfSense add VLANsvia Interfaces: VLAN
on the switch:
add all the same VLANs
make sure the port that goes to pfSense has a T (for tagged) for all those VLANs
then on each other port, have a U (for untagged) for one VLAN and set the PVID to the same