<![CDATA[Cannot define table bogonsv6]]>Hey,

I've tried to set up a new Open VPN rule on pfSense 2.1-BETA0 (i386) built on Tue Oct 30 10:31:30 EDT 2012 yesterday. Background: We have three OpenVPN Road Warriors and a special machine in our network which shall not be allowed to connect via VPN. So what I did:

1. Went to Firewall rules
2. OpenVPN
3. Created a rule to block all traffic on OpenVPN to this machine

After that every 10 seconds a notification popped up saying:

php: : New alert found: There were error(s) loading the rules: /tmp/rules.debug:118: cannot define table bogonsv6: Cannot allocate memory pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [118]: table <bogonsv6>persist file "/etc/bogonsv6

I've deleted this rule but the notification still went on, so I commented this line via shell and it was gone. Then I uncommented it again.

I guess it was a wrong approach to block OpenVPN traffic to a specific IP. Can you guys help me out with that?

Cheers,
Szop</bogonsv6>

]]>https://forum.netgate.com/topic/49952/cannot-define-table-bogonsv6RSS for NodeMon, 13 Apr 2026 11:41:10 GMTFri, 02 Nov 2012 09:14:18 GMT60<![CDATA[Reply to Cannot define table bogonsv6 on Fri, 02 Nov 2012 14:44:03 GMT]]>Hey,

thanks for the reply, but can you be a little more specific? Which one: "Firewall Maximum Tables" or "Firewall Maximum Tables Entries"? Both are blank.

EDIT:

I've increased the "Firewall Maximum Table Entries" to 200000 since the word count for /etc/bogonsv6 was 63301. Hope this will solve the problem.

Cheers,
Szop

]]>https://forum.netgate.com/post/362641https://forum.netgate.com/post/362641Fri, 02 Nov 2012 14:44:03 GMT<![CDATA[Reply to Cannot define table bogonsv6 on Fri, 02 Nov 2012 14:00:13 GMT]]>Go to system advanced and increase the limits for the tables.

]]>https://forum.netgate.com/post/362631https://forum.netgate.com/post/362631Fri, 02 Nov 2012 14:00:13 GMT