PPPoE Issue After Upgrade
-
Hello,
I'm trying to move from a pfSense 1.2.3 box to a pfSense 2.0.1 box. I have everything working except our PPPoE DSL connection. I think I've configured it the same on the new box, but the settings screen is slightly different. Is there anything that changed between 1.2.3 and 2.0.1 that would be likely to cause issues with PPPoE?
Here are the mpd.conf configuration files from our old and new configuration. Please let me know if there is anything else I can provide that may help or any logging I can turn on to help me troubleshoot.
Thanks!
Old (working):
pppoe: new -i ng0 pppoe pppoe set iface route default set iface disable on-demand set iface idle 0 set iface up-script /usr/local/sbin/ppp-linkup set bundle disable multilink set bundle authname "XXXXXX" set bundle password "XXXXXX" set bundle no noretry set link keep-alive 10 60 set link max-redial 0 set link no acfcomp protocomp set link disable pap chap set link accept chap set link mtu 1492 set ipcp yes vjcomp set ipcp ranges 0.0.0.0/0 0.0.0.0/0 set ipcp enable req-pri-dns set ipcp enable req-sec-dns open iface
New (not working):
New Config: startup: # configure the console set console close # configure the web server set web close default: pppoeclient: create bundle static wan set iface name pppoe0 set iface disable on-demand set iface idle 0 set iface enable tcpmssfix set iface up-script /usr/local/sbin/ppp-linkup set iface down-script /usr/local/sbin/ppp-linkdown set ipcp ranges 0.0.0.0/0 0.0.0.0/0 #log -bund -ccp -chat -iface -ipcp -lcp -link create link static wan_link0 pppoe set link action bundle wan set link disable multilink set link keep-alive 10 60 set link max-redial 0 set link disable chap pap set link accept chap pap eap set link disable incoming set link mtu 1492 set auth authname "XXXXXX" set auth password XXXXXX set pppoe service "" set pppoe iface bge0 open
-
What is in the PPP system log? (See Status -> System Logs and click on PPP tab.)
What is reported in the PPP log after you go to Status -> Interfaces and click on the Reconnect button beside PPPoE?
-
Strange, I'm not sure what I did differently, but when I moved the DSL line back over to the new box to test and get a log file, PPPoE worked. Oh well, just glad I'll finally get to enjoy all the goodies 2.0 has to offer.
Thanks