<![CDATA[Manually Remove Captive Portal]]>I have an issue with Captive Portal now showing as installed under the Packages section, and not available to download from the available packages section.

The Captive Portal section is there in the web pages, and the services are present and started, but nothing is working AT ALL.

This happened after I upgraded to 2.0.2

How do I manually remove all the packages and processes so that it will show up again as an available package for re-installation?

Thanks!!

]]>https://forum.netgate.com/topic/52226/manually-remove-captive-portalRSS for NodeWed, 11 Mar 2026 13:34:19 GMTWed, 23 Jan 2013 03:34:55 GMT60<![CDATA[Reply to Manually Remove Captive Portal on Sat, 26 Jan 2013 06:01:45 GMT]]>Rebuilt the server and everything is fine.

Whatever it was, something did not go right with the upgrade to 2.0.2

I'm running 2.0.2 now, and it's working very well.

]]>https://forum.netgate.com/post/374910https://forum.netgate.com/post/374910Sat, 26 Jan 2013 06:01:45 GMT<![CDATA[Reply to Manually Remove Captive Portal on Thu, 24 Jan 2013 14:12:42 GMT]]>@wallabybob:

Have you enabled Captive Portal on the wireless interface?

Yes, it's enabled for both the Wireless subnet NIC and the OPT1 NIC. But will only block people on the OPT1 NIC.

]]>https://forum.netgate.com/post/374546https://forum.netgate.com/post/374546Thu, 24 Jan 2013 14:12:42 GMT<![CDATA[Reply to Manually Remove Captive Portal on Thu, 24 Jan 2013 08:57:52 GMT]]>Have you enabled Captive Portal on the wireless interface?

]]>https://forum.netgate.com/post/374472https://forum.netgate.com/post/374472Thu, 24 Jan 2013 08:57:52 GMT<![CDATA[Reply to Manually Remove Captive Portal on Wed, 23 Jan 2013 06:41:30 GMT]]>@cmb:

Not sure what you mean, captive portal isn't a package, it's built-in and can't be removed.

Ok. I thought it was a add-in.

I guess a better question then, is why nothing get's redirected to the Portal Page.

Everyone is just allowed to go to the web without any prompting. The service appears to be running.

[edit] I just found out that it is not working ONLY for the 'Wireless' subnet I have. The OPT1 network is working properly. So it appears that the process is not binding to the 'Wireless'  subnet NIC properly.[/edit]

Thanks for any help!

]]>https://forum.netgate.com/post/374200https://forum.netgate.com/post/374200Wed, 23 Jan 2013 06:41:30 GMT<![CDATA[Reply to Manually Remove Captive Portal on Wed, 23 Jan 2013 03:54:48 GMT]]>Not sure what you mean, captive portal isn't a package, it's built-in and can't be removed.

]]>https://forum.netgate.com/post/374194https://forum.netgate.com/post/374194Wed, 23 Jan 2013 03:54:48 GMT