Inherited a pfsense box and have openvpn issues
-
I have a windows network with a pfsense firewall with openvpn and a ipsec connection between 2 sites. The issue I am running into is with the openvpn connection for the owners laptop. Using the openvpn client connector it connects to the the pfsense gateway and pulls a IP from the range assigned to it. The local range is different then the assigned range and might be a sub netting issue. I dont see a set route that would allow communication or where I should set it up
-
Give us a network map, more specifics about your network and post the server config.
-
No need to configure a route, only a firewall rule under your Firewall -> Rules OpenVPN tab
-
Ok i got access to the Bosses Laptop to setup the open vpn
Since his is the only one using the Openvpn i started from scratch, though each of the tutorial all failed to allow me to connect to the new openvpn
-
Good news was able to get the connection to complete and can ping out file server and RDP to it but outlook will not connect or our internal message service
-
Glad to hear you're making progress, but If you want us to help we will need more details.
-
Solved it turns out my predecessor had the same issue and i found his post on hardforum.com and fixed it right off the bat.
-
Care to share the root cause and solution?