<![CDATA[Scheduled rules not working according to schedule]]>Hi,
i'm using 1.2RC2. I have been testing scheduled rules with allowing traffic for a host 00:00 - 16:00. If i start some traffic within this time range it works well, but the traffic is still allowed even after 16:00. If the rule set is reloaded at 16:10, the traffic is blocked. It seems like the rule set is not automatically reloaded when we pass a scheduled time range. Or is it me that is missing something?

This behaviour was seen with 1.2RC1 as well.

Thanks,
Eskild

]]>https://forum.netgate.com/topic/5477/scheduled-rules-not-working-according-to-scheduleRSS for NodeSun, 19 Apr 2026 02:53:19 GMTSun, 12 Aug 2007 18:19:33 GMT60<![CDATA[Reply to Scheduled rules not working according to schedule on Tue, 12 Feb 2008 18:19:37 GMT]]>No, you need cron items in your config. Please download and test it with rc5, i cannot duplicate this problem

]]>https://forum.netgate.com/post/166139https://forum.netgate.com/post/166139Tue, 12 Feb 2008 18:19:37 GMT<![CDATA[Reply to Scheduled rules not working according to schedule on Tue, 05 Feb 2008 23:41:18 GMT]]>i did a clean install of 1.2-RC4 and restored my config, here is what happened.

The /etc/crontab was emptied because my backed up config did not contain <cron>entries.

So i had to to a reinstall in a vmware extract the cron entries from the xml file and add them to my current config and then restore the configuration again..

Is this correct behavior by PFsense? to empty the /etc/crontab if you do not have cron entries in your config file?</cron>

]]>https://forum.netgate.com/post/165792https://forum.netgate.com/post/165792Tue, 05 Feb 2008 23:41:18 GMT<![CDATA[Reply to Scheduled rules not working according to schedule on Wed, 23 Jan 2008 23:43:00 GMT]]>You have serious other issues then.  /etc/crontab has all kinds of stuff setup by pfSense well beyond schedules no matter what.

I would reinstall.

]]>https://forum.netgate.com/post/165074https://forum.netgate.com/post/165074Wed, 23 Jan 2008 23:43:00 GMT<![CDATA[Reply to Scheduled rules not working according to schedule on Wed, 23 Jan 2008 23:33:08 GMT]]>my schedules are not working properly either, i am also missing that cron info from my config file, and /etc/crontab is empty:

SHELL=/bin/sh
PATH=/etc:/bin:/sbin:/usr/bin:/usr/sbin
HOME=/var/log
#minute hour    mday    month   wday    who      command
#

I am currently running 1.2-RC4 upgraded from a fresh install of 1.2-RC3

Anyone else still got this issue?

]]>https://forum.netgate.com/post/165073https://forum.netgate.com/post/165073Wed, 23 Jan 2008 23:33:08 GMT<![CDATA[Reply to Scheduled rules not working according to schedule on Mon, 13 Aug 2007 20:28:32 GMT]]>I tried to upgrade from 1.2 BETA3 to RC2 and the cron items did not disappear. Tho I did not setup any schedules. Means I don't know whether this behavior only occurs if upgrading and having setup schedules.

Regards
Daniel S. Haischt

]]>https://forum.netgate.com/post/158615https://forum.netgate.com/post/158615Mon, 13 Aug 2007 20:28:32 GMT<![CDATA[Reply to Scheduled rules not working according to schedule on Mon, 13 Aug 2007 19:06:12 GMT]]>That´s fine, have fun…..

Up to now, i cannot find the bug now and then an update killed the crons...., so i cannot duplicate this behaviour.

Greetings
Heiko

]]>https://forum.netgate.com/post/158605https://forum.netgate.com/post/158605Mon, 13 Aug 2007 19:06:12 GMT<![CDATA[Reply to Scheduled rules not working according to schedule on Mon, 13 Aug 2007 18:55:59 GMT]]>Thanks, those changes did the job, and scheduling is working perfect.

I have no idea why the cron part was missing, but i have used pfSense since it was in alfa stage and have not installed and configured the system from scratch since the first install.

Thanks again.

]]>https://forum.netgate.com/post/158603https://forum.netgate.com/post/158603Mon, 13 Aug 2007 18:55:59 GMT<![CDATA[Reply to Scheduled rules not working according to schedule on Mon, 13 Aug 2007 17:52:29 GMT]]>Ok, i think that´s the problem, please make a backup of your config.xml and paste the cron-item section which i posted into your config.xml.
Make a restore and test it again…
Greetings
heiko

]]>https://forum.netgate.com/post/158601https://forum.netgate.com/post/158601Mon, 13 Aug 2007 17:52:29 GMT<![CDATA[Reply to Scheduled rules not working according to schedule on Mon, 13 Aug 2007 17:42:56 GMT]]>This is the only cron item that i have:
<cron>I have searched through the entire config.</cron>

]]>https://forum.netgate.com/post/158600https://forum.netgate.com/post/158600Mon, 13 Aug 2007 17:42:56 GMT<![CDATA[Reply to Scheduled rules not working according to schedule on Mon, 13 Aug 2007 17:34:26 GMT]]>Hello,
you must have the cron items which i posted!

]]>https://forum.netgate.com/post/158599https://forum.netgate.com/post/158599Mon, 13 Aug 2007 17:34:26 GMT<![CDATA[Reply to Scheduled rules not working according to schedule on Mon, 13 Aug 2007 17:18:11 GMT]]>Hi,
it seems like my config is slightly different than yours. This is the last lines of my config where the schedule part is:

<description>Default OVPN server</description>

<cron><schedules><schedule><name>Buddy</name>
<descr>Block schedule</descr>
<timerange><position>1,2,3,4,5,6,7</position>
<hour>1:00-6:00</hour>
<rangedescr></rangedescr></timerange></schedule>
<schedule><name>Test</name>
<descr><timerange><position>1,2,3,4,5,6,7</position>
<hour>12:00-23:45</hour>
<rangedescr></rangedescr></timerange></descr></schedule></schedules>
<rrd><enable></enable></rrd></cron>

]]>https://forum.netgate.com/post/158598https://forum.netgate.com/post/158598Mon, 13 Aug 2007 17:18:11 GMT<![CDATA[Reply to Scheduled rules not working according to schedule on Mon, 13 Aug 2007 09:53:02 GMT]]>Hello,
i have re-tested you configuration. The Schedules works here….

Do you have all cron-items ? Please Check your config.xml for these section...

<cron><minute>0</minute>
<hour></hour>
<mday></mday>
<month></month>
<wday></wday>
<who>root</who>
<command></command>/usr/bin/nice -n20 newsyslog
<minute>1,31</minute>
<hour>0-5</hour>
<mday></mday>
<month></month>
<wday></wday>
<who>root</who>
<command></command>/usr/bin/nice -n20 adjkerntz -a
<minute>1</minute>
<hour></hour>
<mday>1</mday>
<month></month>
<wday></wday>
<who>root</who>
<command></command>/usr/bin/nice -n20 /etc/rc.update_bogons.sh
<minute>/60</minute>
<hour></hour>
<mday></mday>
<month></month>
<wday></wday>
<who>root</who>
<command></command>/usr/bin/nice -n20 /usr/local/sbin/expiretable -v -t 3600 sshlockout
<minute>1</minute>
<hour>1</hour>
<mday></mday>
<month></month>
<wday></wday>
<who>root</who>
<command></command>/usr/bin/nice -n20 /etc/rc.dyndns.update
<minute>/60</minute>
<hour></hour>
<mday></mday>
<month></month>
<wday></wday>
<who>root</who>
<command></command>/usr/bin/nice -n20 /usr/local/sbin/expiretable -v -t 3600 virusprot
<minute>/60</minute>
<hour></hour>
<mday></mday>
<month></month>
<wday></wday>
<who>root</who>
<command></command>/usr/bin/nice -n20 /usr/local/sbin/expiretable -t 1800 snort2c
<minute>/5</minute>
<hour></hour>
<mday></mday>
<month></month>
<wday></wday>
<who>root</who>
<command></command>/usr/local/bin/checkreload.sh
<minute>0,15,30,45</minute>
<hour></hour>
<mday></mday>
<month></month>
<wday></wday>
<who>root</who>
<command></command>/etc/rc.filter_configure_sync
<minute>/5</minute>
<hour></hour>
<mday></mday>
<month></month>
<wday></wday>
<who>root</who>
<command></command>/etc/ping_hosts.sh</cron>

]]>https://forum.netgate.com/post/158578https://forum.netgate.com/post/158578Mon, 13 Aug 2007 09:53:02 GMT<![CDATA[Reply to Scheduled rules not working according to schedule on Sun, 12 Aug 2007 21:30:54 GMT]]>Hi, thanks for your feedback. I have created one schedule and one rule using the schedule (see attached images). The traffic for the host is not stopped by pfSense after 16:00 as it should. If i however save the ruleset so the rules are reloaded, the traffic stops as it should. But then the traffic wont start again at 00:00 without manualy loading the ruleset again.

I hope clearifies my problem. If this is working with you then it is obviously something wrong with by boxes.

schedule.png
schedule.png_thumb
rule.png
rule.png_thumb

]]>https://forum.netgate.com/post/158573https://forum.netgate.com/post/158573Sun, 12 Aug 2007 21:30:54 GMT<![CDATA[Reply to Scheduled rules not working according to schedule on Sun, 12 Aug 2007 20:52:44 GMT]]>So, i have tested tonight the schedules with my "test plan" and i cannot find a bug…but i am not perfect...

Any further information of your schedules-szenario would be helpful.....

]]>https://forum.netgate.com/post/158571https://forum.netgate.com/post/158571Sun, 12 Aug 2007 20:52:44 GMT<![CDATA[Reply to Scheduled rules not working according to schedule on Sun, 12 Aug 2007 19:09:46 GMT]]>I have tested the schedules completly with the 1.2rc1 and it works as it should, but maybe i have anything to ignore….

]]>https://forum.netgate.com/post/158570https://forum.netgate.com/post/158570Sun, 12 Aug 2007 19:09:46 GMT<![CDATA[Reply to Scheduled rules not working according to schedule on Sun, 12 Aug 2007 18:46:45 GMT]]>Describe in more detail the rule and associated schedule.

]]>https://forum.netgate.com/post/158568https://forum.netgate.com/post/158568Sun, 12 Aug 2007 18:46:45 GMT