<![CDATA[Dual: Static and PPPoe]]>Is it possible to configure a dual WAN configuration of:

  1. ADSL router in bridge mode (public IP assigned by ISP), the router has its own internal IP eg 192.168.1.1
  2. Ethernet connection from a Wireless Router in WISP mode (NAT on the device), IP eg 192.168.2.1

Will Embedded version 1.0.1 be enough or do I have to upgrade to 1.2 ?

Best regards,
Fishrman

]]>https://forum.netgate.com/topic/5650/dual-static-and-pppoeRSS for NodeMon, 15 Jun 2026 11:01:11 GMTFri, 31 Aug 2007 09:57:53 GMT60<![CDATA[Reply to Dual: Static and PPPoe on Mon, 03 Sep 2007 19:03:29 GMT]]>I see… but I'm not in a hurry with that balancing, so If there a chance that I can do it through the GUI in the next version, then I will wait. I just don't have such an easy access to that PC running PFSense, so I prefer the method with not having to take the flash card out of that PC. I would also prefer having my settings left intact after upgrade.
Nevertheless thank you very much.

]]>https://forum.netgate.com/post/159299https://forum.netgate.com/post/159299Mon, 03 Sep 2007 19:03:29 GMT<![CDATA[Reply to Dual: Static and PPPoe on Mon, 03 Sep 2007 11:40:28 GMT]]>What cmb meant is: dont update it with the update-file over the GUI.
You still can download the fresh-install-img-file and reflash directly to the new version without a problem.

]]>https://forum.netgate.com/post/159294https://forum.netgate.com/post/159294Mon, 03 Sep 2007 11:40:28 GMT<![CDATA[Reply to Dual: Static and PPPoe on Mon, 03 Sep 2007 11:26:14 GMT]]>Thank you very much for that warning… then I will be waiting for the next version!!

]]>https://forum.netgate.com/post/159293https://forum.netgate.com/post/159293Mon, 03 Sep 2007 11:26:14 GMT<![CDATA[Reply to Dual: Static and PPPoe on Sun, 02 Sep 2007 08:02:58 GMT]]>Do not upgrade embedded right now, it will almost certainly blow up spectacularly (it was broken post-RC1, we'll have it fixed by next RC). What you're wanting to do is certainly possible, but don't use 1.0.1 as there are a ton of multi WAN bugs in it that are long fixed.

]]>https://forum.netgate.com/post/159261https://forum.netgate.com/post/159261Sun, 02 Sep 2007 08:02:58 GMT<![CDATA[Reply to Dual: Static and PPPoe on Sat, 01 Sep 2007 05:19:48 GMT]]>Configuration settings are preserved after a firmware update.

]]>https://forum.netgate.com/post/159240https://forum.netgate.com/post/159240Sat, 01 Sep 2007 05:19:48 GMT<![CDATA[Reply to Dual: Static and PPPoe on Fri, 31 Aug 2007 13:55:32 GMT]]>Thank you very much for such a fast reply.
I have an embedded installation @ CF 512MB card. Can I update it through firmware upload and pointing to pfsense.img out of pfSense-1.2-RC2-Embedded.img.gz ??
Will the settings be preserved?

]]>https://forum.netgate.com/post/159230https://forum.netgate.com/post/159230Fri, 31 Aug 2007 13:55:32 GMT<![CDATA[Reply to Dual: Static and PPPoe on Fri, 31 Aug 2007 10:13:34 GMT]]>yes and yes (but 1.2 fixes a lot and is better for loadbalancing)

]]>https://forum.netgate.com/post/159225https://forum.netgate.com/post/159225Fri, 31 Aug 2007 10:13:34 GMT