Load Balance and FailOver + Squid
-
Hello PFSense Community
I'm trying at long time to do LoadBalance with FailOver using Squid but without sucessful
My firewal has two interfaces WAN
The gateways are OK! and LoadBalance + Failover too but without SQUID :/
When i try to use Squid Just in the port 3128.
- Load Balance don't work
- Only Wan0 can out to Internet.Details:
-
The Last Rule is : All Blocked to all sources and destinations and any protocol. All interfaces (Wan0,Wan1,Lan)
-
I'm using a Dns Local Server as primary, and DNS GOOGLE(8.8.8.8) as secondary
-
I created one group called MultiWan with tier 1 in both WANS interfaces and nobody was setted as default.
-
Miscellaneous / Allow default gateway switching is allow. Would i have some problem if i don't set default gateway in my interfaces and select this option?
-
FLOATING (2 rules one to tcp/udp 53 and Tcp 3128. Source e destination any. ALL WANS destination OUT.
-
LAN ( Source LanNet/ Destination Any / Ports 53 3128)
-
Firewall: NAT: Outbound, MANUAL NAT –-> One rule for each interface. All Pass
-
SQUID: Proxy interface apenas a LAN.
-
Proxy Port 3128
-
DNS-servers: My local dns
-
Custom Options: tcp_outgoing_address 127.0.0.1;
Thanks For Help, i tried a lot of tutorias in the forum and don't works.
-