Route is not working until ping command
-
Hi, I have weird problem for me :)
I am routing local network (eth0) to VPN network (eth1)
Local network 10.25.1.0/24 - GW 10.25.1.1
VPN network 10.11.12.0/24 - GW 10.11.12.1On VPN network is Cisco ASA on IP 10.11.12.2 - I have this as another GW setup in pfsense.
Static routes are set: 192.168.1.0/24 via 10.11.12.2
FW rules set from local network to VPN netork - everything can communicate
Pass * * * 10.25.1.0/24 to 10.11.12.0/24 * *
FW rules set in VPN network - everything can communicate to local network and everything can communicate via optional GW 10.11.12.2
Pass * * * 10.11.12.0/24 to 10.25.1.0/24 * *
Pass * * * * to * via 10.11.12.2Everything looks fine, but commication is working only after I run ping to 192.168.1.X machine.
Ping is working well, and after ping is working everything, but if I will not use ping first, no communication.Can anyone explain me, what is causing thins and how i can fix it?
Thanks :)
-
I think the problem can be PROXY ARP.
On the Cisco ASA is proxy arp enabled.
How is possible enable or check if proxy arp is working on pfsense?