Quagga "no redistribute" bug
-
Hi,
my last try ti fix this problem was not working (sorry for that again)..
But I have still problem that OSPF is redistributing networks which it must not do.When searching for right syntax / perhaps order of them I found this bug message
http://comments.gmane.org/gmane.network.quagga.user/12580
and it would fit:
[2.1-BETA1][root@fw1.zws8.local]/root(8): ospfd -v
ospfd version 0.99.21
Copyright 1996-2005 Kunihiro Ishiguro, et al.My Problem:
-
I define my public/transfer network which is used between my fw pairs of 2 buildings as non-redistributable (1st attached picture)
-
I got this config file snippet:
router ospf ospf router-id 192.168.6.12 log-adjacency-changes detail redistribute connected redistribute static passive-interface em1 network 192.168.6.0/28 area 192.168.6.0 network 172.16.4.1/32 area 192.168.6.0 network 192.168.8.0/24 area 192.168.6.0 distribute-list dnr-list out connected distribute-list dnr-list out kernel distribute-list dnr-list out static access-list dnr-list deny 5.145.xxx.0/24 access-list dnr-list deny 5.145.xxx.0/24 access-list dnr-list deny 192.168.6.0/24 access-list dnr-list deny 192.168.6.0/24 access-list dnr-list permit any
but it does not work => 2nd picture => you'll thee both networks in OSPF routing table :(
EDIT: btw… What happens with the "Area ID" input ? There is no separated list per Area ID so it seems useless... ;)
-