PF Sense 2.0.3 multy WAN Traffic Shaper error
-
Posting because my head feels like moosh now :) Want to set up a Multy Wan router with squid and traffic shaping, 23 Wan's. When running the Trafic Shaper Wizard, the following error is reported.
There were error(s) loading the rules: pfctl: the sum of the child bandwidth higher than parent "root_rl0"pfctl: linkshare sc exceeds parent's sc /tmp/rules.debug:413: errors in queue definition parent qInternet not found for qACK /tmp/rules.debug:414: errors in queue definition parent qInternet not found for qP2P /tmp/rules.debug:415: errors in queue definition parent qInternet not found for qVoIP /tmp/rules.debug:416: errors in queue definition parent qInternet not found for qGames /tmp/rules.debug:417: errors in queue definition parent qInternet not found for qOthersHigh /tmp/rules.debug:418: errors in queue definition parent qInternet not found for qOthersLow /tmp/rules.debug:419: errors in queue definition pfctl: Syntax error in config file: pf rules not loaded - The line in question reads [ the sum of the child bandwidth higher than parent "root_rl0" pfctl]: ...
This killes internet traffick. If i disable the LAN interface rules under Traffic Shaper, every thing is ok. Under lan there is two child rules. qlink and qinternet. qlink is set to 20% and qinternet to 93453Kb as well as upper limit and share m2 limit. This appears to me to be the total download limmit if all lines is combined. Appears to be a bug in the Wizard. If i change the 93453 to 80 %, this fix the error report. However i am just not sure.
My line speed per line is around 350 K upload and 3.5 Mb/s download. If i make use of 80% of the combined download speed, one line might still get congested on the download side, without hitting this limit.
Also the flouting rules created for Wan has no direction specified. Would this not limit up and download to the 350 K specified?Any suggestions, tips, inputs or info would be appreciated