<![CDATA[Configure DSL on 2nd WAN port {PPPOE/PPTP/etc}]]>Hi,

I have a the follow ISP setups

1. Cable
2. DSL

I want WAN = Cable and OPT1 = DSL

When I go to configure OPT1 I cannot access the PPPOE setup.

Please advise…

Tim

]]>https://forum.netgate.com/topic/5759/configure-dsl-on-2nd-wan-port-pppoe-pptp-etcRSS for NodeMon, 20 Jul 2026 22:29:49 GMTThu, 13 Sep 2007 06:06:56 GMT60<![CDATA[Reply to Configure DSL on 2nd WAN port {PPPOE/PPTP/etc} on Fri, 14 Sep 2007 03:04:59 GMT]]>@GruensFroeschli:

@nixgeek:

I didn't want the DSL to be the primary WAN by default.
Only to be used for failover, or for specific traffic. Guess I
will have to wait.

You dont need to have WAN as default.
Default is what you define as default in the firewall rules on LAN-tab.
Just set your OPT1 as default…

Exactly, the WAN is only the default and not easily changed for traffic originating from the firewall itself (which in a normal policy routing configuration isn't much - DNS forwarder if you use it, and NTP if you use servers on the Internet).

]]>https://forum.netgate.com/post/159593https://forum.netgate.com/post/159593Fri, 14 Sep 2007 03:04:59 GMT<![CDATA[Reply to Configure DSL on 2nd WAN port {PPPOE/PPTP/etc} on Thu, 13 Sep 2007 17:29:25 GMT]]>@nixgeek:

I didn't want the DSL to be the primary WAN by default.
Only to be used for failover, or for specific traffic. Guess I
will have to wait.

You dont need to have WAN as default.
Default is what you define as default in the firewall rules on LAN-tab.
Just set your OPT1 as default…

]]>https://forum.netgate.com/post/159572https://forum.netgate.com/post/159572Thu, 13 Sep 2007 17:29:25 GMT<![CDATA[Reply to Configure DSL on 2nd WAN port {PPPOE/PPTP/etc} on Thu, 13 Sep 2007 20:32:43 GMT]]>Go for it! I bet patches are accepted…

Sorry, brain f***.
Clients only have a default gateway, not … I was way off track!

]]>https://forum.netgate.com/post/159570https://forum.netgate.com/post/159570Thu, 13 Sep 2007 20:32:43 GMT<![CDATA[Reply to Configure DSL on 2nd WAN port {PPPOE/PPTP/etc} on Thu, 13 Sep 2007 14:34:11 GMT]]>Wow really?  :(

I waited almost a year already.

I didn't want the DSL to be the primary WAN by default.
Only to be used for failover, or for specific traffic. Guess I
will have to wait.

Ok thanks…

Tim

]]>https://forum.netgate.com/post/159561https://forum.netgate.com/post/159561Thu, 13 Sep 2007 14:34:11 GMT<![CDATA[Reply to Configure DSL on 2nd WAN port {PPPOE/PPTP/etc} on Thu, 13 Sep 2007 07:42:10 GMT]]>Use WAN as PPPOE and OPT1 as cable.
PPPOE on something else than WAN is not yet availlable.

]]>https://forum.netgate.com/post/159551https://forum.netgate.com/post/159551Thu, 13 Sep 2007 07:42:10 GMT