Problem routing between VLAN and LAN
-
Hello all
I have a very basic setup here: I have 1 LAN and 1 VLAN and I want to route traffic between them. But I can't get it to work. I have these 2 FW rules setup to allow all traffic but I can't ping a host in the VLAN-network or the other way round.
This is the setup:
Interface re0- LAN (static - 10.0.1.200 /24)
Interface re0 - VLAN50 (static - 192.168.1.200 /24)One VLAN - VLAN50 on interface re0
I have these FW rules:
LAN:
PROTO SOURCE PORT DESTINATION PORT GATEWAY QUEUE
VLAN50
PROTO SOURCE PORT DESTINATION PORT GATEWAY QUEUE
I have DNS Forwarding enabled and a client in VLAN50 is getting an IP from the DNS server in the LAN segment but clients in the VLAN50 segment can't reach clients in the LAN segment and vice versa.
Anybody an idea what I'm doing wrong? Any help is very much appreciated!
-
Do you have allow rules between the net? Do the nets appear in the routing table?
-
Do you have allow rules between the net? Do the nets appear in the routing table?
I have these FW-rules in place for LAN and VLAN:
LAN:
PROTO SOURCE PORT DESTINATION PORT GATEWAY QUEUE
* * * * * * *VLAN50
PROTO SOURCE PORT DESTINATION PORT GATEWAY QUEUE
* * * * * * *Is this what you meant? Or do I need additional rules?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy