No solution with tables and phones, make a big problem in pfsense Lan interface
Welcome all members and developers of pfsense
I have been faced a big problem with phones in my pfsense firewall , i have 12mbps adsl , and i configure queu HFSC on LAN interface,
the problem occure when any andorid phone be far from access point devices and the signal be weak and disconnect ,
after moments the LAN interface be nonresponse .(see the picture attached ).
I try many many ways to prevent that , but i fail , the only solution for this problem is manually shutdown and start again the switch conneted to LAN interface .
Note that : the problem is disappear when phone and tablet that make a problem connect again.
i try to flush arp, flush state table , enable and disable LAN interface and make synproxy state as state type of rules but no solution.
i use packet capture to analysis the traffic but i can't concluion any thing
so pls , any idea to solve this problem
I find a way to solve this problem by disable LAN interface and enable it again from webgui interface LAN page … But how can disable it from shell??? ....
(Ifconfig bge0 down and ifconfig bge0 up) not effectiveness .
I want command act link webgui enable check button .
![Screenshot from 2013-09-18 10:13:00.png](/public/imported_attachments/1/Screenshot from 2013-09-18 10:13:00.png)
![Screenshot from 2013-09-18 10:13:00.png_thumb](/public/imported_attachments/1/Screenshot from 2013-09-18 10:13:00.png_thumb)