<![CDATA[Layer 7 how to? Can't find any documentation.]]>I'm attempting to setup very simply layer 7 qos for team fortess 2/counter strike but i'm not sure how to proceed.

This is what i have so far:

This alone seems to do nothing. The qGames shows no traffic. Is there an additional rule I need to create? I attempted a floating any/any + layer7 rule and that ended up throwing all of my traffic into the qGames queue.

Thanks!

]]>https://forum.netgate.com/topic/61887/layer-7-how-to-can-t-find-any-documentationRSS for NodeMon, 11 May 2026 23:48:20 GMTSat, 19 Oct 2013 06:58:12 GMT60<![CDATA[Reply to Layer 7 how to? Can't find any documentation. on Thu, 02 Jan 2014 20:17:03 GMT]]>Just being a PASS rule doesn't explain why Diablo saw all traffic honor the L7.  This says that all packets matched the L7. Doubtful.

I have the same problem trying to use the L7's.  I add the FTP L7 to my floating FTP Wan out dst port 21 rule and all web traffic comes to a screeching halt.  What an FTP rule has to do with HTTP traffic is beyond me.  I have yet to find one explaination of how to use L7 Pass to Match.  I set a tag (match) word on the pass rule and followed this rule with a "match to" and queue but doesn't work.  With or without the dst port 21 in the second rule, same result.

]]>https://forum.netgate.com/post/437047https://forum.netgate.com/post/437047Thu, 02 Jan 2014 20:17:03 GMT<![CDATA[Reply to Layer 7 how to? Can't find any documentation. on Sun, 20 Oct 2013 00:47:53 GMT]]>Since the rule where you apply the L7 needs to be a "pass" rule, I would create a rule on the LAN interface, above the "catchall" rule, for catching this traffic

]]>https://forum.netgate.com/post/425738https://forum.netgate.com/post/425738Sun, 20 Oct 2013 00:47:53 GMT