Nokia IP330 and 3rd interface…
Hey all.. long time reader first time poster! lol
Anyway Ive been successfully running my IP330 with pfsense for 3 months now.. no issues at all W00T!! Anyway I recently obtained an older Netfinity 5000 and thought about trying out a small web/ftp/ssh server here at home. So following the m0n0 documentation on creating a "DMZ" outta the 3rd interface I thought I had had everything setup correctly but I get no link lights on that 3rd port. I've tried both the onboard nic and a PCI intel nic on the Netfinity side. When I originally setup the IP330 during the console portion I cannot remember if I enabled the OPT at that time, however since I did spoof the mac and "enable" it within the OS, shouldn't it be working?
As far as teh DMZ all I'm wanting to do is segregate that 3rd interface/subnet from the LAN side while port forwarding to the DMZ side.
I followed the 14.1 section here: http://doc.m0n0.ch/handbook-single/#id2604946
Thanks in advance!
And yes I have tried a diff cat5, as well as a different nic. same results. I'd post my config pages if I thought anyone here might be able to help..
GruensFroeschli last edited by
did you add the interface to interface list?
did you create rules that allow traffic?
if you click on "status–>interfaces" what is the displayed status if the interface?
cmb last edited by
Are you connecting the IP330 and Netfinity directly, or is there a switch between? If no switch between, you need to use a crossover cable. You should get a link light regardless of configuration, that's the first thing to resolve.
ZOMG what an idiot! Been doing this kinda stuff for years now and it's the little things you mess up on ;p
A crossover resovled the connectivity issue but now I cannot browse out via Mozilla from that box..hmm. Must be a rules issue now. I can ping the DMZ interface so at least those two are talking. W00T.