Help me, Wifi - Captive Portal
I'm doing with this network like this image
VMWARE have Pfsense and AD
I want to use captive portal for wan interface, to authen user in AD
but, I have a problem: all user wifi go to internet by gateway 192.168.2.1
Anyone can tell me how to route user wifi go to pfsense to authen user AD!
1 -Maybe there's a better way of doing it but a easy way out would be to set 192.168.2.20 as being the default gateway for Wi-Fi clients…
2 - Also you could define another VLAN lets say vlan 100 on the switch setup a native port on vlan 100 connect the LinkSys to it, define a Q tag for vlan 100 on PfSense switch port, create vlan 100 on the PfSense and Q Tag vlan 100 to the same port you have going to the switch, create a DHCP scope for WiFi users on the PfSense.
Hope that helps.
3 - If switch can't support VLAN's put another NIC on PfSense and assign WiFi interface to it, connect LinkSys to that port.
Many thanks to @ar4uall
1. I set Pfsense as the gateway for wi-fi clients, it still have problems
if captive portal set on WAN interface, then all wi-fi clients cannot access internet
if I set Captive portal on Vlan Wi-fi (talk later), then nothing happens, clients can access internet
2. The network is real in my company, and I'm testing pfsense.
The network have Vlan 111 for wi-fi, and others vlan for office. I can't access the multilayer switch and router…
3. My PC doesn't have PCI slot, so I can't plug in NIC :(