Port forwarding not working in pfSense 2.1-RELEASE (amd64)
this is my first time using pfSense so please be gentle :)
I had WRT54GL but i decided to replace it with a server that has two physical network cards. On that server i have installed ESXi. On of virtual servers is also pfSense. Now, i've installed pfsense and got internet to work(though i am not exactly sure how) :P I have one physical card connected to modem and is set to PPoE(WAN) and another one that is connected to switch(LAN). I have one gateway that looks like this:
Name Interface Gateway Monitor
LANGW (default) WAN 184.108.40.206 220.127.116.11
IP 18.104.22.168 is also my external static IP given to me by mi ISP.
Then i added NAT rules for one of my virtual servers with our website.
If Proto Src. addr Src. ports Dest. addr Dest. ports NAT IP NAT Ports
WAN TCP * * WAN address 80 (HTTP) 192.168.3.80 80 (HTTP)
And firewall rule:
IPv4 TCP * * 192.168.3.80 80 (HTTP) * none
Still, if you go to vpl.si website is still not working.
Any ideas? Thanks! 8)
Are you testing from inside your network ? If so you may need to turn on NAT reflection this is found towards the bottom of the nat rule creation page.
well I show that resolving
;; QUESTION SECTION:
;vpl.si. IN A
;; ANSWER SECTION:
vpl.si. 3600 IN A 22.214.171.124
And show it serving up html
wget vpl.si --2014-01-06 09:27:03-- http://vpl.si/ Resolving vpl.si (vpl.si)... 126.96.36.199 Connecting to vpl.si (vpl.si)|188.8.131.52|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 3023 (3.0K) [text/html] Saving to: ‘index.html’ 100%[======================================>] 3,023 --.-K/s in 0.02s 2014-01-06 09:27:03 (175 KB/s) - ‘index.html’ saved [3023/3023] cat index.html <title>VPL - metalizacija, zlatenje, srebrenje, lakiranje, brizganje plastike in orodjarstvo</title>
So seems to be working to me - as stated if your trying to access your public IP from the lan side then you need to make sure nat reflection is enabled.