<![CDATA[1.2-RC3 upgrade on embedded; no console menu]]>Hi!
Just updated my working 1.2-RC3 build 19/11 to the 21/11 build on my Alix2c3 and it's working fine. Except, after a full boot (which I follow using the console cable), these are the last lines I see and then no menu:

Executing rc.d items…
Starting /usr/local/etc/rc.d/*.sh...done.
appending output to nohup.out
Bootup complete

Normally, I get the console menu. What is wrong?

Thanx! Martijn

]]>https://forum.netgate.com/topic/6505/1-2-rc3-upgrade-on-embedded-no-console-menuRSS for NodeMon, 13 Jul 2026 09:59:11 GMTThu, 22 Nov 2007 10:56:43 GMT60<![CDATA[Reply to 1.2-RC3 upgrade on embedded; no console menu on Sun, 23 Dec 2007 21:19:05 GMT]]>@eweri:

Login via ssh and than

/etc/rc.conf_mount_rw
mv /etc/ttys /etc/ttys_back
cp /etc/ttys_wrap /etc/ttys
reboot

This worked for me, thanks

]]>https://forum.netgate.com/post/163700https://forum.netgate.com/post/163700Sun, 23 Dec 2007 21:19:05 GMT<![CDATA[Reply to 1.2-RC3 upgrade on embedded; no console menu on Mon, 17 Dec 2007 19:28:42 GMT]]>Login via ssh and than

/etc/rc.conf_mount_rw
mv /etc/ttys /etc/ttys_back
cp /etc/ttys_wrap /etc/ttys
reboot

Thats it.

]]>https://forum.netgate.com/post/163413https://forum.netgate.com/post/163413Mon, 17 Dec 2007 19:28:42 GMT<![CDATA[Reply to 1.2-RC3 upgrade on embedded; no console menu on Thu, 22 Nov 2007 13:25:19 GMT]]>Me again; could it be that because during the upgrade through the console (option 13), I've chosen option 3 - Embedded kernel (no video, no keyboard) when asked for the kernel version, that my Alix now doesn't display the menu ?

]]>https://forum.netgate.com/post/162225https://forum.netgate.com/post/162225Thu, 22 Nov 2007 13:25:19 GMT