Portfowarding, with a bridge from the LAN to OPT1(wireless)
-
I bridged my Wireless card(opt1) to my LAN
I then forwarded ports from WAN to LAN
The internal IP is the wireless computer.
Is there anything extra since the internal IP is from a bridged interface?
-
here's a screen shot of my forwards, and my rules
-
What is your goal?
I kind of dont understand what you want to accomplish und thus dont understand what your problem is.
-
Ok well, I want the wireless to be on the same subnet as the LAN, so basic windows file sharing can happen between the wireless and wired computers.
Also I want to forward ports to a computer on the wireless(OPT1) so bit torrent and a webui for my bit torrent client can work.
internal IP of the computer I want the ports forwarded to is: 192.168.1.100
So I forwarded those ports to that address, but I can not access the webui, nor is bit torrent working like it should be.
-
now I'm really confused…
I have VNC set up on my computer; 192.168.1.100
the VNC works no problem
I forwarded ports for uTorrent the same exact way;
That does not work - torrents are slow, and the webgui can not be accessed via the external IP at all.
Also, I turned on a remote management port for the pfSense webui; and I can use the external IP from my home computer; but when I'm at a different location; I can't get to the webui for pfSense...
...what's going on here?
-
well, I think I got things figured out; I waited a bit after I made the port forwards; and everything works; I guess it's just not instant, is all.