Unable to Use Dansguard
I am struggling trying to enable Dansguard, this will be running in Transparent-mode.
Here is what I have done so far:
- Download and install Squid Caching Service
- Download and Install Dansguard (Enable it to listen on port 8080 for the LAN IP address or loopback 127.0.0.1)
- Configure a Port-Forward rule as follows
source port any
Destination port HTTP to HTTP
Redirect IP (LAN) of my Pfsense box
Redirect port 8080
As soon as I enable the rule every HTTP access goes down, I lost HTTP access to the internet. I got to disable the Redirection rule (NAT Statement) in order to get it back again.
What am I missing?
Services are up and running
proxy squid 15922 41 tcp4 x.x.x.x:3128 :
proxy squid 15922 42 tcp4 127.0.0.1:3128 :
clamav dansguardi 34333 8 tcp4 x.x.x.x:8080 :
Any help will be highly appreciated it.
Test this in a logical, step-by-step fashion so that you can tell what is broken before adding the redirect rule…
1.) Validate that Squid and Dans are both running... If so...
2.) Try connecting the browser (via explicit proxy settings) to squid and make sure you can get out... If so...
3.) Try connecting the browser (via explicit proxy settings) to dans and make sure you can get out... If so...
4.) Add the redirect rule and delete your browser proxy settings.