Replacing vendor xDSL router
-
Hi guys and welcome to me! ;D ;D ;D
i've the following scenario:
INTERNET <–---> Vendor Router xDSL (with 8 static IP) <-----> Internal Router <-----> Office LAN
Example of assigned IP addresses:
20.20.20.1/29
In my case, i checked that the vendor router has 20.20.20.6 and have assigned to my internal router WAN IP 20.20.20.1 and for my LAN IP 192.168.x.x
EVERYTHING IS WORKING PERFECT
now, I need to change my vendor router with a stupid xDSL modem/router in bridge mode + a dedicated hardware with pfsense on board.
I think to be able to configure this, but unlucky haven't pfsense here....
My question is now:
- configure one Ethernet NIC as my WAN IP (20.20.20.6)
- configure another Ethernet NIC as my LAN IP (20.20.20.1/29)
BUT, what if i shoulda configure a third NIC exactly like the second one?
OK, WILL MAKE IT EASY.
think one like this:
In the LAN ports, now I have every 20.20.20.1/29 IP and i can plug a cable whatever I want. In Pfsense, how can I configurate them?
THX guys!!!
-
P.S. in real, no LAN with 20.x.x.x… they're WAN and NAT is disabled ;)
-
sorry guys again…... I'm watching some youtube videos, and I think that in my case i shoulda use "interface groups"
tomorrow i will try at office