USB модема Huawei E173 - состояние OFFline
-
Добрый день! делаю - дополнительный канал.
Модем - перевел в режим только модем.
PPP nterface интерфейс(ы)/порт(ы) описание ppp0 /dev/cuaU0.0 megafon.ru
Настроил - новый интерфейс.
появился 3g " Мегафон " до 100.88.88.150
Но в шлюзов MEGAFON_PPP 10.64.64.0 0ms 100% в offline
Если дернуть - основной WAN - мегафон не подрубается. Куда смотреть??? Заранее спасибо. -
Советую для начала описать подробнее. Читал между строк и не понял ничего.
По сути: wan 3g пингуется? Попробуйте трассировку сделать через шлюз. Я например адрес первого хопа в мониторинг воткнул шлюза.
(у меня роутер Huawei E5776 присоединен как сетевая карта через usb. Интерфейс ue0. Сейчас второй роутер E5172 буду присоединять).
-
Секунда поиска в Гугле и (внезапно!) - https://doc.pfsense.org/index.php/Known_Working_3G-4G_Modems :
Modem variations reported to NOT work
Huawei E173
It has been reported that some E173 modems are shipping labeled as E173 but have a different chip that is not supported. See below.These have the same model numbers as the above, but have different chips and may not be supported.
Huawei E173s
#Before switching (USB mass storage)
DefaultVendor= 0x12d1
DefaultProduct=0x1c0b
#After switching into modem mode
TargetVendor= 0x12d1
TargetProductList="1c05,1c08"Узнать , что у Вас - https://forum.pfsense.org/index.php?topic=45751.0
P.s. Еще https://forum.pfsense.org/index.php?topic=45157.msg254115#msg254115 :
Hi,
changed to a Huawei E1750 modem and pfSense configurations unchanged and now it seems to work like a charm even when the modem gets an update of the IP-adress. The pfSense modem support list says something about that the E173 sometimes does not have a E173 chip inside, maybe that's the problem in this case.
Try changing to an different modem and the automatic reconnect may work. -
Советую для начала описать подробнее. Читал между строк и не понял ничего.
По сути: wan 3g пингуется? Попробуйте трассировку сделать через шлюз. Я например адрес первого хопа в мониторинг воткнул шлюза.
(у меня роутер Huawei E5776 присоединен как сетевая карта через usb. Интерфейс ue0. Сейчас второй роутер E5172 буду присоединять).
Pfsense 2.1-RELEASE
Есть Wan - статик ип.
раз - в месяц - его вырубает (провайдер чего то)
Решили поставить модем есть E173 - через команду перевел его в режим модем.
Interfaces - (assing) - PPPs - создал:
Interface Interface(s)/Port(s) Description
ppp0 /dev/cuaU0.0 megafon.ruInterfaces: Assign network ports добавил интерфейс мегафон.
в интерфейсах есть мегафон - ип получил 100.124.93.131
но в gateways - статус
MEGAFON_PPP 10.64.64.0 0ms 0.0% Offline -
Секунда поиска в Гугле и (внезапно!) - https://doc.pfsense.org/index.php/Known_Working_3G-4G_Modems :
Modem variations reported to NOT work
Huawei E173
It has been reported that some E173 modems are shipping labeled as E173 but have a different chip that is not supported. See below.These have the same model numbers as the above, but have different chips and may not be supported.
Huawei E173s
#Before switching (USB mass storage)
DefaultVendor= 0x12d1
DefaultProduct=0x1c0b
#After switching into modem mode
TargetVendor= 0x12d1
TargetProductList="1c05,1c08"Узнать , что у Вас - https://forum.pfsense.org/index.php?topic=45751.0
P.s. Еще https://forum.pfsense.org/index.php?topic=45157.msg254115#msg254115 :
Hi,
changed to a Huawei E1750 modem and pfSense configurations unchanged and now it seems to work like a charm even when the modem gets an update of the IP-adress. The pfSense modem support list says something about that the E173 sometimes does not have a E173 chip inside, maybe that's the problem in this case.
Try changing to an different modem and the automatic reconnect may work.Не совсем понял - как узнать - версию продукта.
-
Есть еще 4G мегафон
Model:M100-4 - определяет его программа как E3272НОООО - его не хочется -переводить в режим только модем.
-
Не совсем понял - как узнать - версию продукта.
https://forum.pfsense.org/index.php?topic=45751.0