No contact to wan
-
Hello
i installed pfSense-1.2-RC3-LiveCD-Installer.iso
configured wan and lan
wan site is getting ip from modem
pc is getting ip from pfsense
i can get in de webgui but i can not
ping modem
get acces to modem
what is the problem ?
-
http://forum.pfsense.org/index.php/topic,7001.0.html
-
-
If you are looking for help on the forum because you have a problem:
provide as much information as possible.
(log-outputs, screenshots of config/rules, etc.)
Often a Diagram (ASCII ART ?) can help more than pages of descriptions how your network is set up. -
wich screens you want to see ?
i only configured wan as dhcp
and lan as dhcp server
thats all i tried to setup as a load balancer with second wan also nothing with the pools inserted
if i only configer wan to contact modem and lan give pc a ip then there must be internet acces or not ?
or need i to ad rules ?
i have 2 adsl modems and want to load balance
-
http://forum.pfsense.org/index.php/topic,6921.0.html
-
-
I thought you have 2 ADSL modems?
Could you not provide a diagram of your desired setup and include in it your IP ranges you use?
-
i found 1 problem
1 nic not full supported by freebsd
now one problem left i can only acces 1 modem
when i switch utp cabels no conection (i did renew dhcp)
diagram
2 modems conected to 2 nic in pfsense machine
1 nic out for local network
-
i have 3 3com 3c905b installed but there is an irq conflict
only one wan works at a time
how can i solve this ?
switched cards used also intel cards same problem.
-
Try turning as much off in bios audio, modem, parallel and serial ports etc. that use irq
-
fixed no irq problem any more
still only ONE wan connection at a time
i can only connect to 1 modem at a time and only true dhcp, static does not work at all ????