If there a supported way to change the default on this system to SMP at this point? I only see one kernel on the system, so I am not sure where to set SMP or if it is at all possible.

Thank you.

Dmesg:

=================
Copyright 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p8 #0: Wed Nov  7 18:38:17 EST 2007
    sullrich@builder6.pfsense.com:/usr/obj.pfSense/usr/src/sys/pfSense.6
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz (2394.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
  Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0xe3bd<sse3,rsvd2,mon,ds_cpl,vmx,est,tm2,<b9>,CX16,<b14>,<b15>>
  AMD Features=0x20100000 <nx,lm>AMD Features2=0x1 <lahf>Cores per package: 2
real memory  = 1072562176 (1022 MB)
avail memory = 1040572416 (992 MB)
wlan: mac acl policy registered
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <ptltd  rsdt="">on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <acpi cpu="">on acpi0
pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
pci_link2: BIOS IRQ 5 for 0.29.INTC is invalid
pci0: <acpi pci="" bus="">on pcib0
pcib1: <acpi pci-pci="" bridge="">irq 11 at device 1.0 on pci0
pci1: <acpi pci="" bus="">on pcib1
pcib2: <acpi pci-pci="" bridge="">irq 11 at device 28.0 on pci0
pci9: <acpi pci="" bus="">on pcib2
pcib3: <acpi pci-pci="" bridge="">at device 0.0 on pci9
pci10: <acpi pci="" bus="">on pcib3
em0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 6.2.9="">port 0x4000-0x403f mem 0xe0240000-0xe025ffff,0xe0200000-0xe023ffff irq 11 at device 1.0 on pci10
em0: Ethernet address: 00:1b:21:08:37:56
em1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 6.2.9="">port 0x4040-0x407f mem 0xe0260000-0xe027ffff,0xe0280000-0xe02bffff irq 11 at device 1.1 on pci10
em1: Ethernet address: 00:1b:21:08:37:57
pci9: <base peripheral,="" interrupt="" controller=""> at device 0.1 (no driver attached)
pcib4: <acpi pci-pci="" bridge="">irq 11 at device 28.4 on pci0
pci13: <acpi pci="" bus="">on pcib4
em2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 6.2.9="">port 0x5000-0x501f mem 0xe0300000-0xe031ffff irq 11 at device 0.0 on pci13
em2: Ethernet address: 00:30:48:8e:b6:02
pcib5: <acpi pci-pci="" bridge="">irq 11 at device 28.5 on pci0
pci14: <acpi pci="" bus="">on pcib5
em3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 6.2.9="">port 0x6000-0x601f mem 0xe0400000-0xe041ffff irq 11 at device 0.0 on pci14
em3: Ethernet address: 00:30:48:8e:b6:03
uhci0: <uhci (generic)="" usb="" controller="">port 0x3000-0x301f irq 10 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <uhci (generic)="" usb="" controller="">on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <uhci (generic)="" usb="" controller="">port 0x3020-0x303f irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <uhci (generic)="" usb="" controller="">on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <uhci (generic)="" usb="" controller="">port 0x3040-0x305f irq 9 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <uhci (generic)="" usb="" controller="">on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <uhci (generic)="" usb="" controller="">port 0x3060-0x307f irq 11 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <uhci (generic)="" usb="" controller="">on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">mem 0xe0000000-0xe00003ff irq 10 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller="">on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib6: <acpi pci-pci="" bridge="">at device 30.0 on pci0
pci15: <acpi pci="" bus="">on pcib6
pci15: <display, vga="">at device 0.0 (no driver attached)
isab0: <pci-isa bridge="">at device 31.0 on pci0
isa0: <isa bus="">on isab0
atapci0: <intel ich7="" sata300="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30b0-0x30bf at device 31.2 on pci0
ata0: <ata 0="" channel="">on atapci0
ata1: <ata 1="" channel="">on atapci0
pci0: <serial bus,="" smbus="">at device 31.3 (no driver attached)
acpi_button0: <power button="">on acpi0
speaker0: <pc speaker="">port 0x61 on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive="" controller="">port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
ppc0: <ecp parallel="" printer="" port="">port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <parallel port="" bus="">on ppc0
lpt0: <printer>on ppbus0
lpt0: Interrupt-driven port
ppi0: <parallel i="" o="">on ppbus0
pmtimer0 on isa0
orm0: <isa option="" roms="">at iomem 0xc0000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff on isa0
atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
atkbd0: <at keyboard="">irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <system console="">at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2394011745 Hz quality 800
Timecounters tick every 1.000 msec
Fast IPsec: Initialized Security Association Processing.
ad0: 76319MB <seagate st380815as="" 3.aad="">at ata0-master SATA150
acd0: CDROM <cd-224e-n 1.aa="">at ata1-master UDMA33
Trying to mount root from ufs:/dev/ad0s1a</cd-224e-n></seagate></generic></system></at></keyboard></isa></parallel></printer></parallel></ecp></floppy></pc></power></serial></ata></ata></intel></isa></pci-isa></display,></acpi></acpi></intel></intel></uhci></uhci></uhci></uhci></uhci></uhci></uhci></uhci></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></intel(r)></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></ptltd ></lahf></nx,lm></b15></b14></sse3,rsvd2,mon,ds_cpl,vmx,est,tm2,<b9></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>