<![CDATA[WAN Subnet Issues]]>Hi guys,
Hi from Australia !

I have a odd issue , the national 3g network run by Telstra is give me a hard time.

Long story short i have a 3g modem bridged into the wan port of the Pfsense - VK-T40E2

Telstra no longer have static ips on the 3g network.
i get on WAN (DHCP) eg:

IP: 123.209.26.230  
Subnet mask IPv4 255.255.255.255
Gateway IPv4 123.209.26.1

The internet does not work.  :-[

Now i think its the subnet , so i manually added  the same ip , but changed the subnet to 255.255.255.0

It starts working !  ;D

My only issue is if i power down the device and power back up (normally get a new ip in dhcp)
the net does not work, the ip i have set is no longer valid for that device as far as i can work out.

Any ideas?

Is there a script where i can change the subnet after receiving a IP ?

To make things even weirder , if i plug the 3g modem into a pc with dhcp , i get the same ips and subnet of 255.255.255.255
but internet works …  :o  so why is pfsense so picky about the subnet?

]]>https://forum.netgate.com/topic/68518/wan-subnet-issuesRSS for NodeSun, 11 Oct 2026 20:53:09 GMTMon, 28 Apr 2014 13:33:11 GMT60<![CDATA[Reply to WAN Subnet Issues on Sun, 04 May 2014 07:04:15 GMT]]>Thank you for helping me find a solution to the issues i was having.

From the article posted, i can see a solution , but as the gateway keeps changing , How can i create a script that will apply this fix automatically.

i was thinking i could create a script and called it up at <afterfilterchangeshellcmd>Thank you and i appreciate your support.

Wato</afterfilterchangeshellcmd>

]]>https://forum.netgate.com/post/459603https://forum.netgate.com/post/459603Sun, 04 May 2014 07:04:15 GMT<![CDATA[Reply to WAN Subnet Issues on Fri, 02 May 2014 05:57:55 GMT]]>That's not a valid IP configuration, technically that shouldn't work on anything. You're being assigned a /32 network on Ethernet, that means the firewall itself is the only device on that network. FreeBSD won't ARP IPs outside of a directly-attached subnet. Windows will ignore the mask and try. Other OSes may or may not.

There is a work around.
https://redmine.pfsense.org/issues/972

]]>https://forum.netgate.com/post/459245https://forum.netgate.com/post/459245Fri, 02 May 2014 05:57:55 GMT