Hamakua (Netgate) FW-7522 fresh 2.1 install?
-
Hi
I am a little puzzled. Trying to flash a fresh nanobsd image of pfSense 2.1 to a CF card for use in a Lanner FW-7522 (Netgate Hamakua) device. I tried initially using the "standard" nanobsd-4g image but it won't boot - complains that "cpu doesn't support long mode"I see some files in a "legacy" folder on Netgate's site e.g.
https://firmware.netgate.com/legacy/But no 2.1 images.
What is the procedure for getting this device working on 2.1? Can I just flash 2.0.3 and then upgrade via the standard GUI method?any help much appreciated, thanks
-
Try i386 image.
-
We stopped selling it at least 4 years ago.
-
^What Robi said. ;)
"cpu doesn't support long mode" is telling you that you're trying to load a 64bit image on a CPU that doesn't support 64bit instructions. You should have no problem running the standard 32bit Nano image on that box. Also you shouldn't be using 2.1 as it now has a few security holes, use 2.1.3 for example:
http://files.nyi.pfsense.org/mirror/downloads/pfSense-2.1.3-RELEASE-4g-i386-nanobsd.img.gzSteve
-
Thank guys. I got it working by flashing 2.0.3 (i386) from here. After that, I was able to update to 2.1.2 using the standard nanobsd update image. I see 2.1.3 is available now, I may try the auto-upgrade option. So far it's working ok! :)
Update: I updated to 2.1.3. So far so good.