I can't route through my openVPN tunnel
-
Hey all,
im having an issue getting to my LAN from my openVPN connection. I'm able to connect to the vpn with no issues but I cannot access anything on my LAN. I have routes in pfsense to both openvpn network and the LAN, and my laptop also has route to my pan network through my vpn tunnel.
mac laptop routing info
10.2/16 10.2.6.5 UGSc 0 0 tun0 10.2.6/29 10.2.6.5 UGSc 0 0 tun0 10.2.6.5 10.2.6.6 UH 2 0 tun0
and my pfbox has
IPv4 Destination Gateway Flags Refs Use Mtu Netif Expire default 198.206.134.1 UGS 0 3883508 1500 em0 8.8.8.8 198.206.134.1 UGHS 0 14502 1500 em0 10.0.0.0/8 10.3.0.2 UGS 0 5952 1500 ovpns2 10.2.0.0/16 link#2 U 0 9352529 1500 em1 10.2.0.1 link#2 UHS 0 0 16384 lo0 10.2.6.0/29 10.2.6.2 UGS 0 1362 1500 ovpns1 10.2.6.1 link#8 UHS 0 0 16384 lo0 10.2.6.2 link#8 UH 0 0 1500 ovpns1 10.3.0.1 link#30 UHS 0 0 16384 lo0 10.3.0.2 link#30 UH 0 0 1500 ovpns2 68.56.40.15 198.206.134.1 UGHS 0 7320231 1500 em0 127.0.0.1 link#6 UH 0 99076 16384 lo0 198.206.134.0/24 link#1 U 0 1465612 1500 em0 198.206.134.59 link#1 UHS 0 0 16384 lo0
on the firewall on pfsense i have a allow any>any rule for openvpn.
EDIT:
heres my trace route from my computerTraceroute has started… traceroute to 10.2.0.1 (10.2.0.1), 64 hops max, 72 byte packets 1 * * * 2 * * * 3 * * * 4 * * * 5 * * * 6 * * * 7 * * * 8 * * * 9 * * * 10 * * * 11 * * * 12 * * 10.2.0.1 (10.2.0.1) 1100.417 ms
im not sure what to do :(
-
You have a strange VPN setup.
VPN1: 10.2.6.0/29
VPN2: 10.0.0.0/8
?????VPN1 is part of VPN2!
Why is VPN2 as large? I can't believe that your hardware can manage as many connections.
Why is VPN1 as small? By default the server allocates a /30 net for each client.You should clean up this at first.