Pls help: Limit total bandwidth and limit per IP
-
Hi! I am newbie here and also newbie in pfsense. I just want to ask if it posible to setup on floating rules a total bandwidth limit and limit per ip or pc.
In other words The total bandwidth of 5 computers is 1024kbps at port 80 and the 5 computers is limited for 256kbps per pc on port 80. if the 5 computers browse the web or download a files they could not exceed to the total bandwidth of 1024kbps at port 80. but every computer has a limit of 256kbps at port 80 but it depend the total bandwidth of 1024kbps on port 80. otherwise the squid proxy is no limit or should not affected by the limiter (No limit on squid proxy).it should look like this
1024kbps port 80 total bandwidth limiter –--> 256kbps port 80 bandwidth per pc(5 PCs).
here is my setup for limiter
Name: totaldownload
Bandwidth: 1024kbps
Mask: nonename: totalupload
bandwidth: 1024kbps
mask: nonedownloadperpc
bandwidth: 256kbps
mask: destination addressesuploadperpc
bandwidth: 256kbps
mask: destination addressesHere is my floating rules setup but not working
For total bandwidth limit on port 80
Action: Match
Interface: wan/lan
Direction: out
Source: any
Source port: any
Destination: any
Destination port: 80
Gateway: 192.168.2.1
In/Out: totalupload/totaldownloadFor bandwidth limit per pc on port 80
Action: Match
Quick: checked Apply the action immediately on match.
Interface: wan/lan
Direction: in
Source: ClientPC (I setup it to allias)
Source port: any
Destination: any
Destination port: 80
Gateway: none
In/Out: uploadperpc/downloadperpcmy pfsense version 2.1.2
squid 2.7.9the total bandwidth is working but the limit per pc is not working. and the squid proxy is working for no limit.
when I change the destination port 80 to any at limit per pc. is working well, except the squid proxy, the squid proxy has a limit of 256kbps. I want the squid proxy has no limit.thanks in advance!! I hope you help me!! sorry for my english!!
thanks and god bless!
-
just get idea of foxale08 in this thread https://forum.pfsense.org/index.php?topic=63531.0
-
just get idea of foxale08 in this thread https://forum.pfsense.org/index.php?topic=63531.0
thanks this is informative, hope it will work too to pfsense 2.1.2, I hope it will equally share on each ip. how about no limit on squid proxy? thank you so much!!
-
just get idea of foxale08 in this thread https://forum.pfsense.org/index.php?topic=63531.0
thanks this is informative, hope it will work too to pfsense 2.1.2, I hope it will equally share on each ip. how about no limit on squid proxy? thank you so much!!
the howto of foxale08 is still working in 2.1 and higher versions (2.1.1,2.1.2,2.1.3)
tested only in single dsl line
with regards to squid, try to pud your limiter in floating rule or if you want in lan rule, make an external cache server -
just get idea of foxale08 in this thread https://forum.pfsense.org/index.php?topic=63531.0
thanks this is informative, hope it will work too to pfsense 2.1.2, I hope it will equally share on each ip. how about no limit on squid proxy? thank you so much!!
the howto of foxale08 is still working in 2.1 and higher versions (2.1.1,2.1.2,2.1.3)
tested only in single dsl line
with regards to squid, try to pud your limiter in floating rule or if you want in lan rule, make an external cache serverthanks about the bandwidth sharing, I try it but not working, I try to download a file and then I try to browse a website to other pc but the internet on other pc was slow to load a page.
-
just get idea of foxale08 in this thread https://forum.pfsense.org/index.php?topic=63531.0
thanks this is informative, hope it will work too to pfsense 2.1.2, I hope it will equally share on each ip. how about no limit on squid proxy? thank you so much!!
the howto of foxale08 is still working in 2.1 and higher versions (2.1.1,2.1.2,2.1.3)
tested only in single dsl line
with regards to squid, try to pud your limiter in floating rule or if you want in lan rule, make an external cache serverthanks about the bandwidth sharing, I try it but not working, I try to download a file and then I try to browse a website to other pc but the internet on other pc was slow to load a page.
do you have squid?
if yes, then, use delay pools for extensions. -
just get idea of foxale08 in this thread https://forum.pfsense.org/index.php?topic=63531.0
thanks this is informative, hope it will work too to pfsense 2.1.2, I hope it will equally share on each ip. how about no limit on squid proxy? thank you so much!!
the howto of foxale08 is still working in 2.1 and higher versions (2.1.1,2.1.2,2.1.3)
tested only in single dsl line
with regards to squid, try to pud your limiter in floating rule or if you want in lan rule, make an external cache serverthanks about the bandwidth sharing, I try it but not working, I try to download a file and then I try to browse a website to other pc but the internet on other pc was slow to load a page.
do you have squid?
if yes, then, use delay pools for extensions.I have no idea about delay pools I am new in pfsense, if you don't mind can you guide me?..
Also I have a problem to my pfsense. when I visit google.com it say "This webpage is not available" but when I manually put the squid proxy ip and port to my browse it works. how to solve this problem? I do not want to put a proxy on every browser.
I am using squid 2.7.9 and the Transparent proxy was checked.
pfsense version 2.1.3thanks in advance!!