<![CDATA[Wulti Wan issue on 2.1.3]]>Hello
I am using pfsense 2.1.3 with multi wan (2) 1 lan 1 dmz. The scope is to direct traffic from lan to wan1, and dmz to wan2. No load balance or fail over. Even though i have managed to route outbound access from these two interfaces to the desired wan, i am experiencing inbound (access_list) issues. When i try to access a lan server from the public wan ip (with nat port forwading) everything works fine, but when i try to do the same on a dmz server fron tha wan2 public ip i get no luck. I believe i must be doing something wrong on the nat statements (i am using automatic outbound) but i have also tried manual statements. I do also believe that the firewall policies are ok (from dmz to wan2) since i get the wan2 public ip address.

any help??

Thank you in advanced

]]>https://forum.netgate.com/topic/68821/wulti-wan-issue-on-2-1-3RSS for NodeThu, 15 Oct 2026 08:22:08 GMTTue, 06 May 2014 08:14:44 GMT60<![CDATA[Reply to Wulti Wan issue on 2.1.3 on Tue, 06 May 2014 10:18:36 GMT]]>Hello,
case solved. I replaced all aliases of dmz with machines ips and works fine.

]]>https://forum.netgate.com/post/460068https://forum.netgate.com/post/460068Tue, 06 May 2014 10:18:36 GMT