<![CDATA[Network Layout]]>I am not sure if pfsense is capable of this so I thought I'd ask while my hardware is in the mail.

Can I turn off the dhcp server?

I have 4 nic's in my router, 1 for internet, 3 for LAN. However I want each lan port to be a gateway for a different network, and I want everything that goes over LAN1 to go to VPN1, everything that goes over LAN2 to go over VPN2, and everything that goes over LAN3 to go over VPN3. Can i set up 3 seperate vpn's in pfsense, then have traffic route over different ones based on what port it comes in through?

]]>https://forum.netgate.com/topic/68836/network-layoutRSS for NodeWed, 07 Oct 2026 09:39:34 GMTTue, 06 May 2014 14:45:23 GMT60<![CDATA[Reply to Network Layout on Thu, 08 May 2014 13:10:28 GMT]]>As a rough guide a D525 will top out at ~50Mbps of VPN traffic total. It varies by encryption type etc. That's assuming you're terminating the VPNs at the pfSense box which you appear to be doing.

Steve

]]>https://forum.netgate.com/post/460618https://forum.netgate.com/post/460618Thu, 08 May 2014 13:10:28 GMT<![CDATA[Reply to Network Layout on Tue, 06 May 2014 15:06:48 GMT]]>Ok, great. I was worried that I wouldn't be able to specify which, I haven't looked at it at all, but it's time for a light weight security appliance. Do you think that an intel atom d525 can handle it? I'd imagine raw throughput shouldn't tax the cpu that hard.

]]>https://forum.netgate.com/post/460171https://forum.netgate.com/post/460171Tue, 06 May 2014 15:06:48 GMT<![CDATA[Reply to Network Layout on Tue, 06 May 2014 14:47:44 GMT]]>Yes, Firewall Rules on your Interfaces and OpenVPN with config to route the networks.

]]>https://forum.netgate.com/post/460161https://forum.netgate.com/post/460161Tue, 06 May 2014 14:47:44 GMT