Original Setup

• WAN PPPOE from DSL Router
  LAN 10.0.1.0/24 to unmanged netgear switch
  OpenVPN client and rule to push a specific port through the VPN interface

• Ubiquiti AP LR

• Apple Airport acting as AP

I bought a GS724T and want to setup two VLANs. One to replace the LAN (I read somewhere that you should use VLAN 1, and I think thats what LAN is), and one with DHCP that is routed through my VPN.

Working to

• VLAN 100 - Replacing old LAN - 10.0.1.0/24
  VLAN 200 - Routed through OPENVPN - 10.0.2.0/24
  LAN - (VLAN ID 1 I guess) - 10.0.5.0/24
  Ubiquiti AP LR - Two networks, one from each VLAN

I haven't shut the LAN off obviously, but mostly because I kept locking myself out the netgear.

Currently I have the Airport aP working, but I've somehow completely broken the Ubiquiti(I suspect invalid netgear VLAN setup).

If I do a traceroute from VLAN 100 or VLAN 200, it looks like it routes through the VPN. I'm unsure why, but I suspect bad NATing.

Physical setup on Netgear:
Port 1 is connected to the PC running pfsense
Ports 6 - 9 are PCs and such
Port 10 is the airport AP
Port 22 is the Ubiquiti AP

I can supply any pictures that my help my situation.

Thanks!