Problems converting from Single LAN to VLANs
-
This might need to be moved, but I'm unsure to which forum.
Original Setup
-
WAN PPPOE from DSL Router
LAN 10.0.1.0/24 to unmanged netgear switch
OpenVPN client and rule to push a specific port through the VPN interface -
Ubiquiti AP LR
-
Apple Airport acting as AP
I bought a GS724T and want to setup two VLANs. One to replace the LAN (I read somewhere that you should use VLAN 1, and I think thats what LAN is), and one with DHCP that is routed through my VPN.
Working to
- VLAN 100 - Replacing old LAN - 10.0.1.0/24
VLAN 200 - Routed through OPENVPN - 10.0.2.0/24
LAN - (VLAN ID 1 I guess) - 10.0.5.0/24
Ubiquiti AP LR - Two networks, one from each VLAN
I haven't shut the LAN off obviously, but mostly because I kept locking myself out the netgear.
Currently I have the Airport aP working, but I've somehow completely broken the Ubiquiti(I suspect invalid netgear VLAN setup).
If I do a traceroute from VLAN 100 or VLAN 200, it looks like it routes through the VPN. I'm unsure why, but I suspect bad NATing.
Physical setup on Netgear:
Port 1 is connected to the PC running pfsense
Ports 6 - 9 are PCs and such
Port 10 is the airport AP
Port 22 is the Ubiquiti API can supply any pictures that my help my situation.
Thanks!
-