Multi Wan Remote admin access
-
Hello all,
I've seached and tried various things, but with no luck, i'm hoping someone can help.
I can port forward and create rules no issue on a single WAN config. I took that same router, added in a 2nd card for to create a multi wan setup.
I haven't changed any of the port forwarding rules or nat stuff.
Add the second card has broken my remote administration and my port forwardings.
I think it has to do with it relying on the wrong interface maybe?
I'm thinking if I can get the remote admin to work, then the other ones will have the same issue.
I have tried setting the gateway on the remote admin rule to the Wan gateway, still no luck….
Any ideas?
Edit;
The connections are, WAN - DHCP - Public IP, OPT1, DHCP, 192 IP double NAT'd.
When I had WAN as DHCP - Public and OPT1 PPPoE, public and both connections were operational, it would work, as soon as 1 connection went down, it wouldn't work. I now have it through the router as double NAT instead and I can't access the admin from outside the network.